Related Manuals for Zenith P40V24
Summary of Contents for Zenith P40V24
- Page 1 Installation and Operating Guide Model Number | P40V24 | PLASMA DISPLAY PANEL © Copyright 2002, Zenith Electronics Corporation.
-
Page 2: Warnings
CAUTION: Do not attempt to modify this product in any way without written authorization from Zenith Electronics Corporation. Unauthorized modification could void the user’s authority to operate this product. COMPLIANCE: The responsible party for this product’s compliance is:... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS (Continued from previous page) 15. Lightning For added protection for this product (monitor) during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the anten- na or cable system. -
Page 5: Table Of Contents
Contents Warnings ........2 Safety Instructions ......3~4 Step 1. -
Page 6: Step 1. Monitor Installation & Setup Controls And Connection Options
Monitor Controls Front Panel Controls INPUT VOLUME ON/OFF SELECT Main Power Button Power/Standby Indicator Illuminates red in standby. Illuminates green when the Monitor is turned on. Remote Control Sensor Input Select Button Power Button Volume ( ) Button... -
Page 7: External Equipment Viewing Setups
Watching External Equipment Monitor External Equipment Connection Panel AV INPUT EXTERNAL SPEAKER (8 ) AUDIO L AV INPUT Connection to AV Equipment 1. EXTERNAL SPEAKER (8 ohm output) Connect to optional external speaker(s). * For further information, refer to ‘Speaker & Speaker Stand’... - Page 8 TV Setup - After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV program- ming. This monitor cannot display TV programming without a TV tuner device or cable TV converter box connected to the monitor.
- Page 9 atching DTV Setup atching DTV Setup - To watch digitally broadcast programs, purchase/connect a digital SET-TOP BOX. How to connect a user-supplied Digital Set-Top Box • You can use either the monitor’s Y, P RGB-DTV INPUT for video connections, depending on your set top box connectors. Then make the corresponding audio connectons.
-
Page 10: Remote Control Key Functions
Remote Control Key Functions - When using the remote control point, it at the remote control sensor on the Monitor. power on button sleep button Sets the sleep timer. (Refer to p.17) mute button Switches the sound on or off. number buttons video/pc button Selects: Video, S-Video,... -
Page 11: Monitor Accessories
Monitor Overview Accessories Owner’s Manual D-sub 15 pin cable Monitor Installation Options • The Monitor can be installed in various ways such as on a wall, or on a desktop etc. • Install this monitor only in a location where adequate ventilation is available. •... -
Page 12: Turning On The Monitor
Turning on the Monitor Turning on the Monitor just after installation 1. Connect power cord correctly. 2. Press the ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby mode. Press the INPUT SELECT button on the Monitor or press the power on, or video/pc button on the remote control to switch the Monitor on. -
Page 13: Video Menu Options
Video Menu Options PSM (Picture Status Memory) PSM (Picture Status Memory) - PSM adjusts the Monitor to the best picture appearance - PSM is not available in PC mode and PIP. 1. Press the psm button to select the picture appearance setup option. •... -
Page 14: Audio Menu Options
Audio Menu Options SSM (Sound Status Memory) SSM (Sound Status Memory) - SSM lets you enjoy the best sound without any special adjustment because the Monitor automatically selects the appropriate sound option based on the program content. 1. Press the easy sound button to select the picture appearance setup. Flat Speech •... -
Page 15: Special Menu Options
3. Press the button and then use • Select the VCR option if watching a VCR. • Select the TV option for other equipment (Except VCR). 4. Press the enter button. Auto Adjustments (RGB mode only) -
Page 16: Adjusting Horizontal/Vertical Position
Adjusting Horizontal / V ertical Position (RGB mode only) Adjusting Horizontal / V ertical Position (RGB mode only) 1. Press the menu button and then use 2. Press the button and then use 3. Press the button and then use •... -
Page 17: White Wash
White W White W - White Wash removes permanent images from the screen. - Set White Wash ‘On’ until fixed image disappears. 1. Press the menu button and then use 2. Press the button and then use 3. Press the button and then use •... -
Page 18: Pip (Picture In Picture) Feature
PIP (Picture-in-Picture) Feature - PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other source will show a smaller inset image. - Select RGB input source before pressing PIP - This function works only in the following resolution;... -
Page 19: External Control Device Setup
External Control Device Setup - Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitor’s functions externally. - Connect the serial port of the control device to the RS-232C jack on the Monitor back panel. - RS-232C connection cables are not supplied with the Monitor. - Page 20 Set ID Set ID - Use this function to specify a monitor ID number. 1. Press the menu button and then use 2. Press the button and then use 3. Use the button to adjust Set ID to choose the desired monitor ID number. •...
- Page 21 01. Power (Command:a) G To control Power On of the Monitor. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0: Power Off 1: Power On Acknowledgement [a][ ][Set ID][ ][OK][Data][x] Data 0: Power Off 1: Power On G To show Power On/Off. Transmission [k][a][ ][Set ID][ ][FF][Cr] Data 0: Power Off...
- Page 22 07. Contrast (Command:g) G To adjust screen contrast. You can also adjust contrast in the Video menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 * Refer to ‘Real Data Mapping1’ as shown below. Acknowledgement [g][ ][Set ID][ ][OK][Data][x] Data Min: 00 ~ Max: 64 08.
- Page 23 14. PIP (Command:n) G To control the PIP (Picture In picture). You can also control the PIP using the pip button on the remote control or in the Special menu. Transmission [k][n][ ][Set ID][ ][Data][Cr] Data 0: PIP off 1: PIP on Acknowledgement [n][ ][Set ID][ ][OK][Data][x] Data 0: PIP off...
- Page 24 21. Red Adjustment (Command:v) G To adjust red in color temperature. Transmission [k][v][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 * Refer to ‘Real Data Mapping2’. See page 22. Acknowledgement [v][ ][Set ID][ ][OK][Data][x] Data Min: 00 ~ Max: 64 22.
-
Page 25: Ir Code (Nec Format)
IR CODE (NEC Format) How to Connect How to Connect G Connect your wired remote control to remote control jack on the monitor. Remote Control IR Code (NEC Format) Remote Control IR Code (NEC Format) G Output Waveform Single pulse, modulated with 37.917KHz signal at 455KHz G Configuration of Frame •... - Page 26 G Bit Description • Bit “0” 0.56 ms 1.12 ms G Frame Interval : Tf The transmitted waveform as long as a key is depressed. Code (Hexa) Function UP ( DOWN ( VOL+ ( VOL- ( POWER POWER ON SYSTEM OFF MUTE VIDEO/PC VIDEO...
-
Page 27: Maintenance
Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new Monitor. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Cleaning the Screen 1. -
Page 28: Troubleshooting Checklist
Troubleshooting Checklist No picture & No sound Picture okay but No sound The remote control doesn’t work No or poor color or poor picture No output from one of the speakers Strange sound from the Monitor • Check whether the Monitor is turned on. •... - Page 29 Notes...
- Page 30 Notes...
-
Page 31: Specifications
Product Specifications MODEL P40V24 Width (inches) 36.6 Height (inches) Depth (inches) 71.8 Weight (pounds) AC 120V, 60Hz Power Requirements Resolution 640 x 480 (Dot) 16,770,000 (256 steps of each R, G and B) Color • The specifications above may be changed without notice for quality improvement. - Page 32 P/N : 3828VA0355C (NP00KC) 206-3832...