Zenith P50W26 Installation And Operating Manual page 21

Twin Picture
Use the TWIN PICTURE bt,_ton.
• Ead_ press of the TWIN PICTURE button cycles through the screen displays shown below.
Use the WIN.SIZE bb_ton.
• Use the ,41 / !_ button to adjust tt_e sub picture size
• Using WIN,SIZE function in Twin Picture m_ main
and sub picture are adjusted simuP, an_us]y.
Using V_N.SIZE fl._ in PIP mode, sub p_ure is adjust=
ec[
• WIN,POSiTION is not fonctional in twin picture mode.
Use tlae SWAP button to switch the main and sub pictures
in twin picture mode.
Use the SUB INPUT button to select the input source for
the sub picture,
* Using sources RGB1 or RGB2 for main picture you
can select COMPONENT 480i, VIDEO or S-ViDEO for
sub picture
* Using sources WDEO or S°VIDEO for main picture,
you can select COMPONENT 480pi720p/1080i
RG81 or RGB2 for sub picture
* Using sources COMPONENT 480p/720p/1080i for
main picture,, you can _tect VIDEO, or S-VIDEO for
sub picture,
* Using sources COMPONENT 480i for main picture,
you can select RG81, or RGB2 for sub picture,
21