Zenith P50W26 Installation And Operating Manual page 6

Monitor Controls
iNPUT SELECT Button
Power Standby Indicator
Illuminates red in standby MENU Button
mode Hluminates green when VOLUME (_1,1_) Buttons
the Monitor is turned on
_IL, T Buttons
Main Power Button
Remote Control Sensor
oo
1 2 3 4 5 6
O _
m mm
lid
8 1
1. EXTERNAL SPEAKER (8 ohm output) 5,
Connect to optional external speaker(s),
_For further information, refer to 'Speaker & Speaker Stand'
manual.
2, POWER _BD SOCKET 6.
This Monitor operates on an AC power, The voffage is indi-
cated on the Specifications page. Never attempt to operate
the Monitor on DC power.
3,
AUDIO/VIDEO INPUT JACKS
Connect audio/video out from external equipment to these
_acks.
S_VIDEO/AUDIO INPUTS (S-VIDEO)
Connect video out from an S°VtDEO VCR to the S°V_DEO
input.
4. C_PONEt_(DVD!DTV INPUT)/AUDIO INPUT JACKS
REMOTE LOCK Switch
REMOTE CONTROL
When "CONTROL LOCK" is set "ON", Monitor is operated by
the external control device.
RGB10UTPUT(PC/DTV OUTPL._) JACKS
You can w_ch the RGB1 signal on another monffor, connect
RGBI OUTPUT (PC/DTV OUTPUT) to another monitor's
PC input port.
7, AUDIO tNPUTiRGB1 INPUT(PC/DTV INPUT)/
RGB2 INPUT(DIGITAL RGB INPUT) JACKS
Connect the monitor output socket of the PC to tl_is socket
8, RS_232C INPUT(CONTBOUSERVICE) PORT
Connect to the RS-232C port on a PC.