Zenith P50W26 Installation And Operating Manual page 11

Remote Control Key Functions
- When using the remote control aim it at the remote control sensor of the Monitor.
POWER
Switches the Monitor on from
standby or off to standby
Sets the sleep timer.
(Refer to p,35)
APC
Adjusts the factory preset picture
according to the room,
(Refer to p36)
ARC
Changes the picture format,
(Refer to p.45)
Switches the sub picture on or off,
(Refer to p,27)
SWAP
Exchanges m_n and sub picture
images. (Refer to p.28, 30)
MENU
Displays on screen menus one by one
Exits the current menu
Memorizes menu changes.
NUMBER buttons
WIN, SIZE
Adjusts the sub picture size.
WIN.POSITION
Moves the sub picture.
SPLIT ZOOM
Enlarge the screen with regular
ration_
ZOOM-!ZC_OM+
Enlarges or reduces
tl)e main picture size,
Selects: VmEO, S*V_EO, _B1/2
or CO_ONENT mode=
DASP
To seiect the sound appropriate to
your viewing program character:
FLAT, SPOI_, C_EMA, MUSIC,
or I.fS_ (Referto p41)
,RC
Changes the PIP picture format,
(Refer to p,43)
TWIN PICTURE
(Refer to p_30)
INPUT
Selects the input mode for the sub
3ic_ure.
Switches the sound on or off
lily
Selects a mena option,
411 1 il_ (Volu_ button)
Increases/decreases sound level.
Adiusts menu settings
Controls a some video cassette
recorder,
• Open the battery compartment cover on the back side and
insert the batteries with correct polarity,
. [nst_[ two 1.5V alkaline ba4teries of AAA type, Don't mix used
batleries with new batteries
11