Table of Contents
Advertisement
USING ACROBAT 9 PRO
Editing PDFs
A
B
C
Toggle Interactive Mode
A. Interactive mode is not available. B. Interactive mode is available but not selected. C. Interactive mode is selected.
Create a new batch sequence
Choose Advanced > Document Processing > Batch Processing.
1
Click New Sequence.
2
3
Type a descriptive name for your sequence in the Name Sequence dialog box and click OK.
In the Batch Edit Sequence dialog box, click Select Commands.
4
Select a command on the left side of the Edit Sequence dialog box and click Add.
5
6
Click Edit to change the settings for the selected command.
Repeat steps 5–6 to add and edit additional commands. Use the Move Up and Move Down buttons to rearrange
7
the commands in the order you want, and then click OK.
In the Edit Batch Sequence dialog box, choose the settings you want from the menus.
8
9
Click Output Options, select the options you want to include, and then click OK.
Automate password entry for a batch sequence
Before you batch process PDFs that are encrypted or password protected, you can set your digital ID to enter the
required password automatically.
Choose Advanced > Security Settings.
1
2
Select Digital IDs from the left.
Select an ID from the list on the right and then select the following:
3
Logs in using the specified digital ID. Type the password and click OK.
Login
Logs out the specified digital ID when you run a sequence.
Logout
More Help topics
"About digital
IDs" on page 247
Last updated 9/30/2011
347
Advertisement
Table of Contents
