Mitsubishi CS-40805 Owner's Manual page 76

Using the Replay feature
[] USE ADVANCED PIP
Current setting
O :Replay
Three images of
previous scenes will
be shown on the screen after the PAUSE
button is pressed. Timing between
images can be controlled by adjusting
speed. This feature is available on
Antenna A (Ant-A) and External Inputs.
Use these buttons on the remote:
[] ADJUST [] ENTER I_ MENU to
to select to enter go back
[] USE ADVANCED PIP I I
[] Current setting
: Replay
O Replay Speed
: 1
Three images of
revious scenes will
e shown on the screen after the PAUSE
button is pressed. Timing between
images can be controledby ad usting
speed. This feature is available on
Antenna A (Ant-A) and External Inputs.
Use these buttons on the remote:
[]ADJUST [] ENTER ['_MENUto
tO select to enter go back
O Select 'ffJse Advanced PIP" in
the "Advanced Features" menu
and set it 1;o"Replay." (See
"Selecting an advanced PIP
function," page 58.)
O Set the replay speed between 1
(short interval) and 9 (long
interval).
Use the MENU button to return
to the normal picture.
Press the :PAUSE button. The
TV will memorize six fl'ames of
video from the main image and
display th_ first three of these
frames as PIP images. (The
interval between the frames is
determined by the replay speed
set in ster, _.)
PAUSE
®
F ,q
r ,q
O Each time you press the
PAUSE button, the memorized
frames will shift upwards.
To cancel the PIP images, press
the PIP button.
*al - a6 : memorized frames
PAUSE PAUSE
[] [] -J- l
/
PAUSE P,aUS-- PAUSE |
0%0 0%
[] [] []
74 Chapter 3: Using the Special Features