Mitsubishi CS-40805 Owner's Manual page 19

Adjusting the color purity (cont.)
_Important:
If color impurity is still present, change the STRENGTH switch
to position "1." If there is still impurity, wail_ a few minutes,
then press the DEGAUSS button on the control panel.
You must adjust the color purity switches each time you move
the set to a new location.
If there is still color impurity after adjusting the switches,
please contact your Mitsubishi Authorized Warranty Center.
Color impurity can also be caused by unshielde_ speakers and
strong magnets. Move these items away from y_ur TV.
16 Chapter 2: Operating Your Television