Mitsubishi CS-40805 Owner's Manual page 20

Using the remote control to operate VCRs, cable
boxes, and other equipment
about your remote control
This television's remote control has four "layers": the TV layer, the
VCR-A layer, the VCR-B layer, and the AUX layer. Each layer can
be used to operate a different component in :your A/V system. You
select the layer you want to use by pressing ore of the "select"
buttons across the top of the remote control.
When you first receive your remote control, the TV layer is set up
to operate your Mitsubishi television, the VCR-A and VCR-B layers
are programmed to operate Mitsubishi VCRs, and the AUX layer is
set to operate Mitsubishi audio components.
You can use the following buttons
• power button
• pause button
• mute control
• super quick view button
• quick view button
• volume control
• input button
• channel control
• enter button
• audio and video controls
to operate your television.
• StarSight function buttons
• menu button
• cancel button
• display button
• home butLon
• off-timer button
• number buttons
• PIP control_
• PLAY bul_tcn
If you have a cable box, a non-Mitsubishi VCI_:, a Mitsubishi
laserdisc player, or a Mitsubishi A2¢" receiver, you can "set up" the
layers in the remote control to operate these components.
The VCR-A layer can be set to operate a non-Mitsubishi VCR; the
VCR-B layer can be set to operate a VCR, cab:.e box, or Mitsubishi
laserdisc player; the AUX layer can be set up to operate a (:able
box, laserdisc player, or A/V receiver; and the TV layer can be set to
operate an AN receiver.
setting up the remote control to operate your VCR
Turn offyour VCR.
Press one of the select buttons across the top of the remote to
choose the layer you want to set up: VCR-A or VCR-B.
O
While holding in the POWER button on the remote control,
enter the code number listed in the chart on the following page
for your brand of VCR. Be ,sure to enter both digits of the code
number. If more than one number is listed, try the first one.
Getting Started 17