Memorizing Channels - Mitsubishi CS-40805 Owner's Manual

Memorizing channels
You can use the menus to automatically memorize the channels
your television can receive. Once channels are memorized, you can
scan through them using the channel controls on the remote control
and control panel.
[] MAIN MENU
_ irst Time Setup
Customize Display
Advanced Features
StarSight Setup
Use these buttons on the remote:
E_ADJUST [] ENTER _ MENU to
to select to enter go back
O Press the: MENU button on the
remote control. The Main Menu
will appear on the screen.
O Use the ADJUST buttons to
select ":First Time Setup." Press
ENTER.
[] FIRST TIME SET UP
_ emorize Channels
Set the Clock
Add/Delete Channel
Set AN Network
Set up Cable Box
Use these buttons on the remote:
--_ ADJUST [] ENTER I_ MENU tO
tO select to enter go back
You will see the First Time Set
Up screen. Use the ADJUST
buttons to select "Meraorize
Channel,;." Press ENTER.
[] MEMORIZE CHANNELS
O Antenna A (Ant-A)
[] Antenna B (Ant-B)
Your TV has two
antenna inRuts caJled
Antenna A (Ant-A} and
Antenna B (Ant-B).
On which inDut would you like to
memorize channels?
Use these buttons on the remote:
_ADJUST [] ENTER [_MENUto
to select to enter go back
O Use the ADJUST buttons to
select the terminal (Ant-A or
Ant-B) to which you attached
an antenna or coaxial cable.
Press ENTER. (If you made a
connection to each terminal,
you should memorize the
channels for the one antenna
now, and for the other antenna
later. )
28 Chapter 2: Operating Your Television