Mitsubishi CS-40805 Owner's Manual page 58

::-Important:
i>Important:
[] SET SUPERQUICKVIEW
Ant. Channel Ant. Channel
iiiii i
[] ........ [] ........
Use these buttons on the remote:
-_] DJUST to I_ CANCEL to cancel
select an input
[] ENTER to enter I'_ MENU to go back
Qv
O Use the ADJUST buttons to
select an antenna (Ant-.A or
Ant-B}. Press ENTER.
You can clear the antenna by
pressing: CANCEL.
[] SET SUPERQUICKVIEW
Ant. Channel Ant. Channel
O Ant-A 001
iiiiiiii !!!!!
[] ........ [] ........
Use these buttons on the remote:
-----] DJUST to i-_ CANCEL to cancel
select a channel
[] ENTER to enter r_ MENU to go back
O Use the ADJUST
buttons,
CHANNEL buttons or number
buttons to add a channel to the
list; press ENTER. YouLcan
clear a channel by pressing the
CANCEL button.
O Repeat steps O, O, and O to
customize the Super Quick
View memory.
O Press the MENU button to exit
this menu.
adding channels to the list with the remote control
Use the channel controls or number buttons to tune the TV to
the channel you want to add to the list.
0
Press and hold the SQV button for about 2 seconds. When you
release the button, the letters "SQV" will appear under the
channel number, indicating that the channel has been added to
Super Quick View memory.
If the Super Quick View memory is full, the letters "SQV" will flash
when you release the SQV button.
Once you've added a channel to the SQV memory, the lette, rs "SQV _'
appear under the channel number any time tlae channel n_amber is
displayed, even if you tune to the channel in another manner.
Using the Advanced Features 55