Table of Contents
Advertisement
TV+antenna
or cable
with
a decoder
box
equipment
you'll
need
Use this hook-up
if you need a decoder box to descramble
cable
signals.
This hook-up will allow you to use the remote
control
to
change
channels.
To complete
the hook-up,
you'll need:
(1) two-way
splitter,
and
3 lengths
of 75 ohm coaxial
cables.
Ij
procedure
(Please
see illustration
on the following
page.)
O Connect
the incoming
cable to the IN te1_ninal on the two-way
splitter.
O Connect
a coaxial cable to one of the OUT terminals
on the same
splitter;
connect
the other end of this cable to the ANT-A
terminal
on the back of the TV.
Connect
the second coaxial cable to the second OUT terminal
on
the same splitter;
connect
the other end of this cable te the IN
terminal
on the decoder
box.
Connect
the third coaxial cable to the OUT terminal
on the, back
of the decoder box, and the other end of this cable to the ANT-B
terminal
on the back of the TV.
Basic Connections
31
Hide quick links:
Advertisement
Table of Contents
