Setting Upyourvcrfor The Firsttime; Setting Up Your Vcr If You Are Using A; Viewing The Picture Coming From Your - Mitsubishi HS-U510 Owner's Manual

5 e nj rVC.
Now that you've completed your antenna, VCR, and TV connec-
tions, you're ready to start enjoying your ecuipment. To get the
most satisfaction out of your VCR, you shmdd carefully read the
two sections, "Setting Up Your VCR for t:he First Time" and
"Viewing the Picture Coming from Your VCR." Then you can start
exploring what your new VCR can do.
In this chapter, you'll learn:
$ Setting UpYourVCR for the First Time
Using the Remote Control
$ Viewingthe Picture Comingfrom YourVCR
Loadingand UnloadingTapes
Playinga Tape
Selectingthe On-screenLanguage
Usingthe Audio and VideoFunctions
$ Usingthe Menus to Set the Time
$ Programming the VCRto ReceiveTV Cl_annels
Recording
Setting UpYourVCRfor the FirstTime
It's important that your VCR is set up correctly before you try to
work it. If you carefully read this section, you will avoid confusion
later and get the most out of operating your system.
This section teaches you about:
* Setting up your VCR if you are using a regular TV, and
• Setting up your VCR if you are using a monitor TV.
Setting upyour VCR if you are usinga regu![ar T V
O Turn on your TVand Vj_rn it to charme:L 3 or 4, whichever is
NOT used for broadcast in your area.
O Look at the back panel of the VCR mid set the VIDEO CHAN-
NEL switch to channel 3 or 4, whichev,_r is the same as the
TV.
Turn the VCR on by pressing the POWER button.
19