Table of Contents
Advertisement
Chapter 3: Operating YourVCR
Using the Menusto Set theTime(cont.)
Dlmportant:
If you want to adjust the clock when your VCR is in stand-by
for
programmed
recording,
simply press the POWER
button
on the
front panel
This turns
off the programmed
recording
light, but
the VCR will remain
turned
off: When you fini:;h adjusting
the
clock, press the POWER
button
again, and make sure that the
programmed
recording
light is 'back on.
If you have a Mitsubishi
TV with both Active A/V Network
_md
"StarSight"
features,
you don't have to set the time on your VCR.
See your TV Owner's
Guide for details.
t Programming the VCR to ReceiveTV Channels
Before your VCR can receive television
channe:[s,
you need to
program
all of the channels
you can receive £nt_ your VCR.
Fortunately,
our menu system
makes this an, easy process._%is
section
will also explain
some other channel-rei[ated
functions.
This section
explains:
• Programming
channels
automatically,
• Using video mute,
• Adding
and deleting
channels,
and
• Selecting
a channel.
Programmingchannels automatically
Using this process,
your VCR _Jll automatically
tune
in all of the
television
stations
you can receive. You can later get rid of un-
wanted
or unused
stations.
Aspecial n oteto
cableboxsubscribers
If your local cable box company
scrarnbles
some or a!! statians,
and/or
requires
you to use a cable box, then your abih'ty to pro-
gram channels
will be limited.
The cable box receives
all of your
channels
and then sends
only one to your TV (_md your VCR),
usually
on channel
3 or 4.
If your cable box or cable system
seems incompatible
with your
new VCR, call your cable company.
They may be able to provide
solutions
to your problems.
Before you begin, you should:
• have completed
all connections
between
your VCR, TV, and
cable or antenna;
(see page 11)
• know how to view the picture coming fl'om your VCR; (see
page 22) and
• know how to use the menus.
(See page 23.)
To program
channels
automatically:
O
Set the VCR's input
to tuner.
To do this, press the INPIYr
button
on the remote
control until a channel
number
appears
on the screen
or on the front panel fluorescent
display.
3O
Advertisement
Table of Contents
