Advertisement
Available languages
Available languages
5, Adjust cycle settings,
if desired
more 0
time
less
0
time
[]
cycte 0
signat
press&hold
to
(_
tod¢/unl_k __j
co,trots
Steam model shown
options
and modifiers
You may adjust different settings, depending on whether
you have selected a Sensor Cycle, Timed Cycle, or Steam
Cycle (on some models). See the "Cycle Guide" for detailed
information.
NOTE: Not all options and settings are available with all cycles.
Not all cycles are on all models.
Sensor Cycles:
You can select a different dryness level, depending on your
load, by pressing the button for More, Normal, or Less.
Selecting More, Normal, or Less automatically adjusts the
dryness level at which the dryer will shut off. Once a dryness
level is set, it cannot be changed without stopping the cycle.
Sensor Cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and
dryness setting.
Timed Cycles:
When you select a Timed Cycle, the
default time appears in the display.
more
Use the More Time and Less Time
time
k_J
buttons to increase or decrease the time
in 1 minute increments. Press and hold to
less
change the time in 5 minute increments,
time\_j
The default temperature
may be changed
by pressing the Temp Level button until the desired dry
temperature
is lit.
Steam Cycles (on some models):
Steam cycles add an extra boost of steam to help reduce
odors and loosen wrinkles.
Custom
Refresh: Use to reduce odors and light wrinkles from
small loads of 3-4 items.
Auto Refresh: Use to reduce wrinkles, including from loads left
in the dryer too long.
6,
Press and hold START/PAUSE
to begin
cycle
start
@
pause
Press and hold the START/PAUSE button to begin the cycle.
7,
Remove
garments
promptly
after cycle is finished
Steam model shown
{
wrinkle 1
prevent
Promptly
remove
garments
after cycle
has completed
to reduce
wrinkling.
If
you will be unable
to remove
the load
promptly,
select
the Wrinkle
Prevent
TM
option
before
pressing
START/PAUSE
to add up to 90 minutes
of periodic
tumbling
after the end of the drying
cycle.
the Sensor Cycle settings
to increase
drying
time
If all your loads on all Sensor Cycles are consistently
not as dry as you would like, you may change the default
settings to increase the default dryness level.
Your automatic drying settings can be adjusted to adapt to
different installations, environmental
conditions or personal
preference. This change is retained and will affect all of your
Automatic cycles, not just the current cycle/load. There
are 3 drying settings, which are displayed using the time
display:
01 Factory preset dryness level.
02 Slightly drier clothes, 15% more drying time.
03 Much drier clothes, 30% more drying time.
To change
the drying
settings:
NOTE: The settings cannot be changed while the dryer is
running or paused. The dryer must be in standby mode (the
power button is off) to adjust the default settings.
1. Before starting a cycle, press and hold the TEMP LEVEL
button for 6 seconds.
2. Press the TEMP LEVEL button to select the dryness
level shown in the time display: 1,2, or 3.
3. Press START/PAUSE to save the new dryness level
setting.
11
Advertisement
