Cpu Fan Removal; Removing The Cpu Fan - NEC PowerMate 2000 Series Service And Reference Manual

CPU Fan Removal

Remove the CPU fan as follows.
1. Remove the support plate from the system board (see "Support Plate
Removal" earlier in this section).
2. Position the system board with the network board side facing down.
3. Unplug the CPU fan cable from connector P22 on the system board (see the
preceding figure "Removing the PC Card Bay" for the location of P22).
4. Turn the system board over, with the network board side facing up.
5. Remove the two screws securing the CPU fan to the heat sink.
6. Remove the CPU fan from the heat sink.
3-16 Disassembly and Reassembly

Removing the CPU Fan

A – CPU Fan B – Screws (2)