Landesk Client Manager - NEC PowerMate 2000 Series Service And Reference Manual

Using the Fix OS option repetitively without using the Auto
or Custom option afterward might cause unpredictable
results.
To restore the system to its factory-installed state, perform another NEC OS
Restore using the
CD").

LANDesk Client Manager

®
LANDesk
Desktop Management Interface (DMI) standard to manage components
(network interface cards, memory, software applications) within a client or
remote PC system. It provides features for managing the resources of a local PC
and can be used by system administrators to manage groups of computer
systems.
Install LANDesk Client Manager from the NEC Application and Driver CD. For
installation information, see "Launching the Application and Driver CD" in
Chapter 3.
Note
before any of the applications or utilities that function in
conjunction with it. Install the Cheyenne Backup utility, the
NEC Configuration Change Notification, NEC Auto Backup
utility, and the NEC WebTelligent software after installing
LANDesk Client Manager.
Do not install both the LANDesk Client Manager and the
NEC SNMP Agent on the same computer.
Do not install both the LANDesk Client Manager and the NEC SNMP Agent on
the same computer. The two applications are incompatible, and neither can be
removed using the uninstall utility. To remove them, a full restore must be
performed after which all applications must be reinstalled.
With Client Manager, the following tasks can be performed:
!
using the Wake-On LAN feature, get remote systems on the network up
and running from a powered-off state (for example, to perform off-hour
maintenance)
!
review system inventory of workstation hardware and software
components
2-30 System Configuration
or
Auto Custom
Client Manager (LDCM) is a software program that uses the
: LANDesk Client Manager should be installed
option (see "Launching the OS Restore