Spool Holder; Telescoping Thread Guide; Thread Net; Thread Unreeling Disc - Pfaff coverlock 4872 Instruction Manual

—
—
Spool holder
Before placing thread cones/spools on
machine you must pull the spool holder 41
fully away from the back of machine.
Thread net
&
Synthetic threads generally unwind too
quickly from the thread spool. Thread nets
have been included to allow easy use of the
se threads. Pull the thread net (located in
the accessory box) over the spool from be
low. Place the spool on the spool holder cat
ching the bottom of the thread net with the
spool pin.
_1
Pcnrc
Telescoping thread guide
Pull the telescoping thread guide 39
upwards to its highest position.
To ensure optimum thread feed, turn the
telescoping parts slowly until you hear the
locking balls click into place.
The thread unreeling disc (in the accessory
box) is used for small spools/spools with
notched or rough ends. Place the spool on
the spool pin 42. Place the thread unreeling
disc on top of the spool. Make sure the
spool disc 44 is used under the spool.
Thread unre&ing disc
9