Edge Guide - Pfaff coverlock 4872 Instruction Manual

4I
2. If not to sew to the end of the fabric, eg.
sewing tubular fabrics:
Sew 4-5 stitches on top of each other. Du
ring the last stitch, turn the hand wheel to
wards you until the needles pierce the fabric
and you have heard each needle "click"
(just before the needles are in the lowest
position>.
Push the edge guide, from the accessory
box, into the guide holder A from the left.
The edge guide can be set as required by
sliding it to the left or right.
After the second"click" (if sewrng a 2 needle
cover stitch> or the third "click" (if sewing a
3-needle cover stitch> turn the handwheel
away from you until the needles are in their
highest position. Raise the presser foot.
Press and hold the Tension Release Key 10.
Hold the threads tightly at the end of the
seam and pull the fabric from the machine.
Cut the threads. Pull the threads through to
the back of the fabric and knot them.
The edge guide is useful for serging seams
at regular intervals with the cover stitch or
two thread chainstitch.
Edge guide
52