Needle Position - Pfaff coverlock 4872 Instruction Manual

Hide thumbs Also See for coverlock 4872:
Table of Contents

Advertisement

Need'e position
This machine has 5 needle positions and
can sew with a maximum of three needles
at any one time. The needle positions
concerned are LO, Li, L2, Ri and R2. The
tightening/fastening screw is located
directly above the corresponding needle.
Note: If the needles LO, Li and L2 have been
inserted, the left needle will be the lowest of
the three.
The different needle positions are depicted
in a schematic drawing in the instruction
manual. Also refer to the examples above
and below. Insert the needle(s) as shown on
the LCD display.
Note: If both the needles R2 and Ri have
been inserted, the left needle will be so
mewhat higher than the right needle.
If the needles L1 and L2 have been inserted,
the left needle will be somewhat lower than
the right needle.
If the needle LO and L2 have been inserted,
the left needle will also be lower than the
right needle.
o
1L2R2
0 12 1R2
0
1L21R2
EILU
0 1L21fl2
0 1L2
1R2
o
1L2 1R2
UJ'EJ
1L21R2
V
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents