8
Mounting the synchronizer
.01.04
Fig. 8 - 04
8
Mounting the spool holder
.01.05
Fig. 8 - 05
Mounting and commissioning the machine
2
1
Slide synchronizer 1 onto the shaft.
Tighten screws 2 slightly.
Plug the synchronizer plug into the
electrical socket of the control box.
Adjust the synchronizer ( see chapter
12.04.01 Adjusting the synchronizer ).
Mount the spool holder as shown in
Fig. 8 - 07.
Insert the spool holder into the hole in
the table top and affix it with the nuts
enclosed.
8 - 3