Advertisement
/
USELEFT HANDLEBARS
CONSOLE MAST
NOTCH_
<
UPPER HANDLEBAR
PRE-ATTACHEO
SETSCREWS
USE RIGHT HANDLEBARS
PRE-ATTACHED
BOLT&WASHER
HANDLEBAR
NOTE: T hereis NOhardwarebag for this step, All hardwareis pre-instaHed.
A) Remove PRE-ATTACHED
BOLT & WASHERS f rom CONSOLE M AST.
B) Slide LOWER HANDLEBARS
onto CONSOLE MASTand attach by re-inserting PRE-ATTACHED
BOLT & WASHERS.
C) Slide UPPER HANDLEBARS
onto LOWER HANDLEBARS
and align NOTCH with TABmaking sure handlebarsare
joined together completely.SecureUPPER HANDLEBARS to LOWER HANDLEBARS using PRE-ATTACHED
SET
SCREWS.
Reminder:ihe U_fierand lower handlebars are marked with a_ L if they are to be used on the left_handside
i of the e!tiptica! or an R if they areto beused onthe right:hand sideof the elliptical, !f the handlebarsare
i assembieflon the incorrectSideof the eiliptical, the unit will not funcfion correcfly.
After
handlebars are assembied theywi/i rotate freely_ be Caotio,s Unfii the
UPPERHANDLEBAR
,_0__
BACKHANDLEBAR C OVER
/-
COVER
NOTE: T hereis NOhardwarebag for this step.
A) Snapthe front and back HANDLEBAR COVERS t ogetheronto the UPPERHANDLE B ARS.
Notethe positionof the snap tabs on the coversbeforesnapping into position.
B) Repeaton other side.
I
RE7.6
Rev.l.3.indd
10-11
7/17/06
4:54:23
PM I
Advertisement
