Starting/Canceling A Function; Ultrabakf Mbaking/Roasting - Kenmore SELECT CLEAN 665.95812 Use & Care Manual

STARTING/CANCELING A FUNCTION
After setting a function, you must press START/
ENTER to starL the function. If you do not
STAIiT__ press START/ENTER within 5 seconds of
ENTER setting, "START?" will show on the
display as a reminder. If you do not press
START/ENTER within 5 minutes of setting, the time
of day will appear. You must reset the function and
press START/ENTER.
OFF/CANCEL will cancel any function except the
Clock, Timer, or Oven or Cooktop Lockouts.
__OFF When you press OFF/CANCEL the display
CANCELwill show the time of day or, if the minute
timer is also being used, the time remaining.
ULTRABAKE
TM
BAKING/ROASTING
Your oven is designed with the ULTRABAKE
TM
enhanced baking system to constantly monitor
oven temoerature. The bake and broil elements
will cycle, as needed, to maintain the desired
temoerature. This feature is automatically acuvatea
when tne oven _s in ooeration.
1. Place the STURDIGLIDE
TM
racK/s ) where you
nee(] them n me oven. For more information, see
the "Posmon_ng racks anc 3ans" secuon, p. 12
2. Press BAKE
IMPORTANT: Never place food or cookware
directly on the oven door or the oven bottom.
PRESS YOU SEE
BAKE
3. Set the temperature (optional). PRESS
Do this step if you want to set a temperature TEMP
other than 350°F. Press TEMP _Ai,_ or (V) pad(s) j_.
to raise or lower the temoerature =n5°F amounts.
use these pads until the desired temoerature
snows on tne small display.
YOU SEE
(example for bake at 375°F)
18