How The Cycle Works; Setting The Controls - Kenmore SELECT CLEAN 665.95812 Use & Care Manual

HOW THE CYCLE WORKS
The SELECT CLEAN
TM
Self-Cleaning cycle uses
temperatures much hotter than normal oven use to
break up and burn away soil and grease. SELECT
CLEAN will set the clean time automatically, once
you choose the soil level. You can choose SoilL
(light soil), SoilA (average soil) or SoiIH (heavy soil),
SoilL will clean for approximately 2-2_ hours, SoilA
for 3-3_ hours and SoilH for 4-4_ hours.
The door must be closed completely for it to lock and
the cycle to begin. If properly closed, the door will
lock approximately 6 seconds after START/ENTER is
pressed. The cycle time includes an approximate 30
minute cool down time. To see the time of day during
the cycle, press CLOCK for 5 seconds.
SETTING THE CONTROLS
1. Press SELECT CLEAN
Press Dad twice SoilA dor average soill w
replace SoilL
Press pa(] tnree times. S(]ilH ffor neavy SOil: wil;
replace SoilA.
NOTE: You can scrol througn all 3 settings
tSoilL. SoilA an(] SoilHj continuously by Dressing
SELECT CLEAN.
2. Press START/ENTER
3. After the SELECT CLEAN Self-Cleaning cycle ends
LOCKED goes off and tile ao(]r unlocks.
PRESS
PRESS
START
ENTER
YOU SEE
(example shows light soil
setting)
YOU SEE
YOU SEE
4.
Press any Daa to remove "End" and bring Back
time of day; or open door. at which t=me "door"
wm De (]_splayed. Then ClOSeooor and time of
day will appear in display window.
YOU SEE
(when pressing any pad)
YOU SEE
(when opening the door}
continued on next page
31