Kenmore SELECT CLEAN 665.95812 Use & Care Manual page 32

SETTING THE CONTROLS (contd.)
5. After the oven is cool, wipe off any residue or ash
with a damp cloth or sponge.
If needed, touch up spots
with a mild abrasive cleanser
or cleaning sponge.
NOTE: Make sure the clock is set to the correct
time of day. (See "Setting the clock" in the "Using
Your Range" section, p. 15.)
1. Press SELECT CLEAN.
Press pad twice, SoilA (for average soil) will
replace SoilL.
Press pad three times, SoilH (for heavy soil) wil!
replace SoilA.
PRESS YOU SEE
NOTE: You can scroll through all 3 settings
(SoilL, SoilA and SoiIH) continuously by pressing
SELECT CLEAN.
2, Press DELAY START.
(example shows light soil
setting)
PRESS YOU SEE
DEtAY
START
3. Set the start time. PRESS YOU SEE
Press the HOUR/MIN (A) or (Y) pad(s) until the
correct time of day to start the SELECT CLEAN
Self-Cleaning cycle shows on the display.
HOUR MIN
(example for 12:30 start time)
4. Press START/ENTER. PRESS YOU SEE
START
ENTER
5. Once Delay Start time has been reached, the
TM
oven begins the SELECT CLEAN Self-Cleaning
cycle.
YOU SEE
(exampleshows light soil setting)
32