Surface Control Knobs; Oven Light Bulb - Kenmore 911.95875 Owner's Manual

CARE ANDCLEANING
RemovableParts
CLEANING MATERIALS
• Dishwashing detergent
• Warm water
• Soft cloth
Melded Rib
Clear
Stem
Sp_ng dip
TO REMOVE
t. Be sure the control knob is in the
off position,
9_ Pull straight off the stem.
Using a piece of string can make
removing the knob easier, Slip the
string under and around the knob,
pulling straight out,
TO CLEAN
Wash the knob thoroughly with soapy
water° Dry completely with a soft cloth,
DO NOT let the knob soak
TO REPLACE
1. Check the back of the knob, The
molded rib of the knob is designed
to fit perfectly onto the knob stem,
2. Align the molded rib to the clear
groove in the knob stem,
3. Push the knob back as far as it will
go_
_ AUTION: Be sure
the oven light
switch is in the off
position. Do not
touch a hot light bulb with
wet hands or a wet cloth.
Wait until the bulb has
cooled and use a dry cloth.
Never touch the live collar of
the bulb. If you are replacing
a broken light bulb make
sure the power supply is off._
Glass Retainer
TO REPLACE
t. Unscrewand remove the glass cover,
2, Unscrew the light blub.
3, Replace the bulb with a 31/2" 40 watt
appliance bulb,
4, Replace the cover°
26