REMOVABLE PARTS
CLEANING
MATERIALS
TO USE:
• Dishwashing
detergent
•
Warm water
* Soft cloth
MOLDED
RIB
_$PRING
CLIP
CLEAR GROOVE
IN STEM
TO REMOVE:
1. Be sure
the control
knob
is in the off
position.
2. Pull straight off the stem.
Using a piece of string can make removing
the
knob easier.
Slip the string under and around
the knob, pulling straight out.
TO CLEAN:
Wash the knob throughtly
with soapy water.
Dry completely
with a soft cloth. DO NOT let
the knob
soak.
_
CAUTION:
Be sure the oven
light
switch
Is in
the
off
position.
Do not touch a hot
light bulb with wet hands or a
wet cloth.
Wait until the bulb
has cooled and use a dry cloth.
Never
touch the live collar of the bulb.
If you
are replacing
a broken light bulb, make
sure the power supply is off.
GLASS
j._E
COLLAR
BULB
TO REPLACE:
1. Unscrew
the light blub.
2. Replace
the bulb
with a 3 1/2" 40 watt
appliance
bulb.
TO REPLACE:
1. Check the back of the knob. The molded rib
of the knob is designed
to fit perfectly
onto
the knob stem.
2. Align the the molded rib to the clear groove
in the knob stem.
3. Push the knob back as far as it will go.
14
removable parts continued