Setting Spool Pins; Presser Foot Lifter; Thread Cutter; Accessory Box - Kenmore 385.12318 Owner's Manual

Setting Spool Pins _- -
(_ Spool pin
The spool pins are used for holding the spools of
thread when feeding thread to the machine°
To use, pull up the spool pins. Push down for storage.
Presser Foot Lifter
(_ Presser foot lifter
(_) Normal up position
0 Highest position
The presser foot lifter raises and lowers your presser foot.
You can raise it about 1/4" (O.6cm) higher than the
normal up position for easy removal of the presser foot
or to help you place heavy fabric under the foot.
Thread Cutter
C) Thread cutter
You do not need a pair of scissors to cut threads after
sewing. Just use the built-in thread cutter.
f
F
Accessory Box
Open the cover of the accessory box toward you_ Sewing
accessories are conveniently located in the box,,
r