JVC XV-FA900BK Instructions Manual page 45

Advanced operations
Available
ZOOM +/-
• During playback or while paused
1 PressZOOM+ 0r-.
The unit zooms in by pressing ZOOM + or zooms
out by pressing ZOOM -.
Each time you press ZOOM +, the magnification is
doubled (up to x 1024).
Each time you press ZOOM -, the magnification is
halved (down to x 1/8).
At the top-left of the screen, the information for the
current magnification appears. While zoomed in,
the indication for the zoomed-in position, which
can be moved by operating the next step, appears
together.
2 Usei/v/-,a/m,- to move the zoomedposition.
NOTES
• To return to normal playback
Press ENTER.
• While zoomed, the picture
may look coarse.
• The zoom information on the screen will disappear if
you do not operate the zoom function for five seconds.
• The indication for the zoomed-in position appears again
when you press ZOOM ÷/-, or A/V/<I/I_.
Available :
The VFP (Video Fine Processor) function allows you to
adjust the picture character according to the type of
programming, picture tone or personal preferences.
o_
ENTER-- __ --A/T/</I_
VFP -
PROGRESSIVE
L_ _ _lp v_ I SCAN
• During playback (for DVD VIDEO: During playback
while picture is shown)
1 PressVFP- PROGRESSIVE SCAN.
The VFP mode selection window appears on the TV
screen.
Note that holding down VFP - PROGRESSIVE SCAN
for a few seconds changes the scanning mode (see
page 8).
2
Use </m,-to select the desired preset.
Each time you press the button, the VFP mode
changes as follows.
Set the video type most suitable to the current
program or the room conditions.
Selected preset
NORMAL
CINEMA
USER1
_ USER 2
Parameter
NORMAL
This mode is suitable for watching TV in a
general room and you cannot change
parameters.
CINEMA
This mode is suitable for watching a movie
software in a room with suppressed light. They
are factory presets and you cannot change
parameters for them.
USER l/USER 2
You can adjust parameters that affect the picture
character and store the settings as the user
preset. See the next step.
43