DVD AUDIO/VIDEO PLAYER XV-FA900BK/XV-FA902SL STANDBY/ON OPEN/ DISC CLOSE SELECT TV-/-- MUTING TITLE/ TV/VIDEO RETURN PAGE GROUP CANCEL VOL- VOL+ ENTER DISC 1 STANDBY/ON PREVIOUS NEXT CLEAR SELECT STROBE STANDBY/ON SLOW - SLOW+ REPEAT SUB TITLE AUDIO fs/Rate PROGRESSIVE SCAN DIGEST ANGLE ZOOM PHONIC...
Page 2
Warnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended toalert...
Page 3
To install batteries in the remote control unit ...12 Remote sensor ...12 To use the remote control unit for TV operation...13 To control the volume of a JVC’s amplifier or receiver ...13 Basic operations Before operation...14 Turning on/off the unit...14 The initial setup before using the unit ...15...
Notes on handling Important cautions Installation of the unit • Select a place which is level, dry and neither too hot nor too cold (between 5 C and 35 C, 41 • Leave sufficient distance between the unit and the TV. •...
Introduction About discs Playable disc types Playable disc types are as follows: DVD AUDIO DVD VIDEO A U D I O V I D E O Video CD The DVD Logo is a trademark. • CD-R and CD-RW discs recorded with the SVCD, Video CD, Audio CD, MP3 or JPEG format can be played back, though some may not be played back because of the disc characteristics or recording conditions.
Disc structure (For DVD AUDIO) A DVD AUDIO disc is comprised of “groups,” and each group is comprised of “tracks.” Some DVD AUDIO discs also contain a “bonus group” that can be played back by entering the “key number” (a kind of password). Usually the contents of a “bonus group”...
Getting started Connections *Before using the unit, you have to connect the unit to a TV and/or amplifier. Before making any connections • Do not connect the AC power cord until all other connections have been made. • Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a copy-protected disc.
Page 9
Connection to a TV equipped with component jacks You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN jacks of your TV with the video cables. Blue The unit Green AUDIO OUT CENTER SUBWOOFER DIGITAL OUT...
Page 10
DVD VIDEO disc in the Progressive scanning mode. In such a case, use the Interlaced scanning mode. To check the compatibility of your TV set, contact your local JVC customer service center. • All JVC progressive TV and High-Definition TV sets are fully compatible with the unit (Example : AV-61S902). DISC 1...
To connect to a stereo audio amplifier/receiver You can enjoy high-quality audio by connecting the unit’s audio output to your amplifier or receiver. Connect the unit’s AUDIO OUT (FRONT LEFT/FRONT RIGHT) jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver.
Getting started To connect to a digital audio device You can enhance the sound quality by connecting either of the unit’s DIGITAL OUT jacks to the digital input of an amplifier, etc. by using an optical or a coaxial digital cable (optional). The digital audio signal from a disc is directly transferred.
To connect the power cord When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the unit’s AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The STANDBY/ON indicator lights in red.
Getting started Using the remote control unit Using the remote control unit, you can operate not only all the functions of the unit but also basic functions of your TV and amplifier/receiver. To install batteries in the remote control unit The battery compartment is located on the back of the remote control unit.
34, 38, 39 To control the volume of a JVC’s 10, 17, 21 amplifier or receiver You can control the volume of a JVC’s amplifier or 12, 33, 34, receiver by using the AMP VOL +/– buttons on the remote control unit.
Basic operations In the following description, we assume that the buttons on the remote control unit are mainly used, however, you may use the corresponding buttons on the front panel if available. NOTE Make sure that the TV - DVD switch on the remote control unit is set to “DVD” when using the 5/∞/ 2/3 and numeric buttons for controlling the unit.
Press and hold down CHOICE for a few seconds to bring up the first page of the DVD PLAYER SET UP display. The pull-down menu of the “ON SCREEN LANGUAGE” is already open. DVD PLAYER SET UP MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH...
Page 18
Basic operations Press ENTER. The pull-down menu of the “DIGITAL AUDIO OUTPUT” appears. DVD PLAYER SET UP DIGITAL AUDIO OUTPUT DOLBY DIGITAL/PCM PCM ONLY ANALOG OUT DOLBY PROLOGIC DOLBY DIGITAL/PCM D. RANGE COMPRESSION STREAM/PCM SELECT USE 5∞23 TO SELECT, USE ENTER TO CONFIRM ENTER TO EXET, PRESS CHOICE.
Basic playback This section describes basic operations for playback of DVD AUDIO, DVD VIDEO, SVCD, Video CD and Audio CD discs. For MP3 and JPEG disc playback, see the separate chapter on and after pages 51 and 55. DISC SELECT STANDBY/ON OPEN/ DISC...
Page 20
Basic operations Place one or two discs in the disc tray(s). Repeat steps 2 and 3 if you wish to set one or more discs to other disc trays. Press 0 OPEN/CLOSE to close the carousel. The carousel closes and the DISC 1 to 7 indicators corresponding to the loaded disc numbers are turned on. The disc set in the front-left tray when the carousel closes is loaded for playback.
To start playback Press 3. Press a desired DISC (1 to 7) button on the front panel, or press DISC SELECT followed by a desired numeric (1 to 7) button on the remote control unit. By the former operation (pressing 3), the unit starts playback from the disc loaded for playback after closing the disc carousel (see page 17 for details about which disc is loaded for playback).
Basic operations NOTES • Once a disc tray whose status is known by the unit becomes accessible when the carousel opens, the corresponding indicator lights even if the disc is not set. • When the RESUME function is “ON” or “DISC RESUME” and the resume point is memorized, pressing 3 starts playback from that point instead of the beginning.
To move back the playback position while DVD VIDEO playback [One touch replay function] During playback of a DVD VIDEO disc, you can move back the playback position 10 seconds from the current position. ¶ During DVD VIDEO playback Press 3. The playback position moves back 10 seconds before the current position.
Basic operations Resuming playback The unit can memorizes the position on a disc where you interrupt playback, and resume playback from that position later. There are two resume modes (DISC RESUME and ON) you can set on the preference display. See page 67 for details about how to set the resume mode.
To resume playback When the resume mode is set to “DISC RESUME” ¶ While stopped, or no disc is inserted Press 0 OPEN/CLOSE to insert a disc whose interrupted position is memorized. After loading the disc, the display window on the front panel shows “---- RESUME”...
Basic operations To locate the beginning of the scene or song You can locate the desired group or track (for DVD AUDIO), title or chapter (for DVD VIDEO), or track (for SVCD/Video CD/ Audio CD) from which the unit starts playback. STANDBY/ON OPEN/ DISC...
To locate a desired selection using the numeric buttons ¶ For DVD AUDIO/DVD VIDEO/Audio CD: For SVCD/Video CD: Use the numeric buttons to specify the number. Depending on the disc type and the unit status, what is specified differs. Unit status Disc type DVD AUDIO While stopped...
Basic operations Variable speed playback You can play back slowly or fast, or advance a picture frame by frame. VOL- VOL+ ENTER 4/¢ PREVIOUS NEXT CLEAR SELECT STROBE SLOW- SLOW+ 1/¡ REPEAT SUB TITLE AUDIO fs/Rate PROGRESSIVE SCAN DIGEST ANGLE ZOOM PHONIC AMP VOL...
Other convenient functions You can check the playback status, as well as change the brightness of the display window. To check the playback status You can see the current selection number (the group/track number for DVD AUDIO, the title/chapter number for DVD VIDEO or the track number for SVCD/Video CD/Audio CD), time information (the track, group or chapter time while stopped, or the elapsed track, group or chapter time during playback) and the transport status (stop, playback, pause etc.) on the TV screen.
Basic operations The indication on the right most of the status bar shows the unit’s transport status as follows: Icon Status Appears in the playback mode. Appears in the stop mode. Appears in the pause mode. Appears in the fast forward/backward playback mode. Appears in the slow-motion playback mode.
Advanced operations This chapter describes operations for various advanced functions of DVD AUDIO, DVD VIDEO, SVCD, Video CD and Audio CD discs. For MP3 and JPEG disc playback, see the separate chapters on and after pages 51 and 55. The following table shows the contents of this section together with effective disc types for each operation. Function Playing from a specific position on a disc To locate a desired scene from the DVD menu...
Advanced operations Playing from a specific position on a disc You can play a disc from the selected track, title, group or chapter, or from the specified time. To locate a desired scene from the DVD menu DVD AUDIO/DVD VIDEO discs generally have their own menus which show the disc contents.
Use the numeric buttons to select the desired item. • To select a number between 1 and 10: Press the corresponding button for the number. • To select a number higher than 10: Use the +10 button. Examples: To select 13: To select 34: To select 40: The unit starts playback of the selected item.
Advanced operations Use 2/3 to move ENTER. The pull-down menu for entering time appears under the (Screen example for DVD VIDEO) DISC 1 TITLE 33 8.5Mbps O FF CHAP. _:__:__ TIME (Screen example for Audio CD) DISC 1 PROG. RND. __:__ TIME Use the numeric buttons (0 to 10) to enter the...
Press DIGEST. Up to nine opening scenes are displayed. Depending on the disc type and whether the disc is being played back or not, the contents shown on the TV screen differ. Disc type Unit status What is displayed While stopped The opening scene of each title During playback...
Advanced operations To play back a bonus group of a DVD AUDIO disc Some DVD AUDIO discs contain a special group called “bonus group” whose contents are not opened to the public. The bonus group is always assigned to the last group of a disc (for example, if a disc contains four groups including a bonus group, “group 4”...
Changing the playback order You can play tracks on a DVD AUDIO, SVCD, Video CD or Audio CD in the desired order or in random order. To play back in the desired order [Program playback] Available : By programming tracks, you can play up to 99 tracks in any order among multiple discs.
Advanced operations Press 3 to start program playback. With a DVD AUDIO/SVCD/Video CD disc, the program table is automatically dismissed when the program playback starts. With an Audio CD disc, the program table remains on the TV screen during program playback. However, pressing the ON SCREEN button brings up the status bar.
Repeat playback You can repeat playback of the current group or track (for DVD AUDIO), current title or chapter (for DVD VIDEO) or current or all tracks (for SVCD/Video CD/Audio CD). You can also repeat playback of a desired part. To repeat the current selection or all tracks [Repeat playback] Available :...
Advanced operations To repeat a desired part [A-B repeat playback] Available : STANDBY/ON OPEN/ DISC CLOSE SELECT TV-/-- MUTING TITLE/ TV/VIDEO RETURN PAGE GROUP CANCEL VOL- VOL+ ENTER ENTER PREVIOUS NEXT CLEAR SELECT STROBE SLOW- SLOW+ REPEAT SUB TITLE AUDIO fs/Rate PROGRESSIVE SCAN...
• To quit A-B repeat playback Press ENTER. The A-B repeat mode turns off, while the playback continues. You can also clear the A-B repeat mode by opening the carousel or changing the current disc. • Selecting “OFF” from the pull-down menu for repeat mode selection, or pressing 4/¢...
Advanced operations Use SUB TITLE or 5/∞ to select the subtitle. Each time you press SUB TITLE or 5/∞, the subtitle language changes. See the following examples for subtitle selection. • For DVD AUDIO/DVD VIDEO Pressing SUB TITLE or 5/∞ cycles among the subtitles recorded on the disc.
Example: 1/3 ENGLISH 2/3 FRENCH 3/3 SPANISH • For SVCD/Video CD Each time you press AUDIO-fs/Rate or 5/∞, the playback audio changes as follows. (for SVCD) (for Video CD) ST (stereo) Press ENTER. You can hear the selected audio. The audio selection window is dismissed. NOTES •...
Advanced operations Press ENTER. You can see the picture from the selected angle. The Angle selection window is dismissed. (Display window) LPCM VCDVD GROUP TITLE TRACK CHAP MPEG DOLBY PROGRAM DIGITAL RANDOM The ANGLE indicator appears during angle- selected playback. From the angle list ¶...
To zoom in/out pictures [ZOOM] Available : VOL- VOL+ ENTER PREVIOUS NEXT CLEAR SELECT STROBE SLOW- SLOW+ REPEAT SUB TITLE AUDIO fs/Rate PROGRESSIVE SCAN DIGEST ANGLE ZOOM PHONIC AMP VOL RM-SXV016J REMOTE CONTROL ¶ During playback or while paused Press ZOOM + or –...
Advanced operations To define a user setting, select a parameter to be edited using 5/∞ from the following. • GAMMA Controls the brightness of a shaded portion without changing the brightness of the entire picture. This control is optimum when you adjust the pictures of software which generates subdued black in a bright room.
Press 5/∞ to adjust the effect level. You can select the effect level among “1” to “5.” The higher value enhances the effect. ACTION Effect level NOTES • To dismiss the 3D PHONIC window: Press 3D PHONIC. • The 3D PHONIC window disappears if no operation is made for about 10 seconds.
Advanced operations Menu bar functions This section describes the functions you can perform via the menu bar. The available menu bar functions differ depending on the disc type. To bring up the menu bar TV-/-- MUTING TITLE/ TV/VIDEO RETURN PAGE GROUP CANCEL VOL-...
Menu bar functions for DVD AUDIO DISC 1 GROUP 3 TRACK 33 TOTAL 1:25:58 8.5Mbps OF F TRACK PROG. RND. Selected Icon Press ENTER to select the time mode among the following. Time mode selection TIME (During playback only) • TIME: Selects the time mode shown in •...
Advanced operations Selected Icon 1 Press ENTER to open the pull-down window. 2 Use 5/∞ to select a desired audio language or Audio selection (During playback only) Selects the audio language or sound. 3 Press ENTER to play back with the selected 1 Press ENTER to open the pull-down window.
Selected Icon 1 Press ENTER to open the pull-down window. 2 Use 5/∞ to select a desired audio language or Audio selection sound. (During playback only) Example: Selects the audio language or 1/3 ENGLISH j 2/3 FRENCH j 3/3 SPANISH sound.
Page 52
Advanced operations Selected Icon Time search (Except during SVCD/Video CD playback with PBC) Specifies the elapsed time from the beginning of the disc, from which the unit starts playback. PROG. Program (While stopped only) Specifies the playback order of tracks. RND.
MP3 disc playback The unit can play back MP3 files on a private CD-R/RW disc or commercial CD. We refer to a disc that contains MP3 file as an “MP3 disc” in this manual. Though available functions with MP3 discs are limited, operations for the available functions are similar to those with Audio CD discs.
MP3 disc playback NOTES • The current Group and Track numbers are shown on the display window in the following manner. LPCM VCDVD GROUP TITLE TRACK CHAP MPEG DOLBY PROGRAM DIGITAL RANDOM Current Group Current Track number number • You cannot advance or reverse playback of an MP3 disc rapidly.
Direct selection You can select a desired Group directly by specifying the Group number. STANDBY/ON OPEN/ DISC CLOSE SELECT TV-/-- MUTING TITLE/ TV/VIDEO RETURN PAGE GROUP CANCEL VOL- VOL+ ENTER PREVIOUS NEXT CLEAR SELECT STROBE SLOW- SLOW+ REPEAT SUB TITLE AUDIO fs/Rate PROGRESSIVE...
MP3 disc playback Checking the sampling frequency and bit rate You can check the sampling frequency and bit rate of digital audio during playback. STANDBY/ON OPEN/ DISC CLOSE SELECT TV-/-- MUTING TITLE/ TV/VIDEO RETURN PAGE GROUP CANCEL VOL- VOL+ ENTER PREVIOUS NEXT CLEAR...
JPEG disc playback The unit can play back JPEG files on a private CD-R/RW disc. We refer to a disc that contains JPEG files as a “JPEG disc” in this manual. Note that, if a disc contains both of MP3 and JPEG files, you can only play back files of either type selected by the MP3/JPEG setting in the PICTURE preference display (See page 64).
JPEG disc playback Basic operations To see a desired picture When loading a JPEG disc, after the disc contents are read, the JPEG CONTROL display automatically appears on the TV screen. JPEG CONTROL Group : 01 / 10 File : 01 / 06 (Total 28) spring begonia.jpg sumer...
To zoom in/out the picture [ZOOM] TITLE/ TV/VIDEO RETURN PAGE GROUP CANCEL VOL- VOL+ ENTER PREVIOUS NEXT CLEAR SELECT STROBE SLOW- SLOW+ REPEAT SUB TITLE AUDIO fs/Rate PROGRESSIVE SCAN DIGEST ANGLE ZOOM PHONIC AMP VOL ¶ While JPEG picture is shown on the TV screen Press ZOOM + or –...
JPEG disc playback Selecting the start point of the slide show STANDBY/ON OPEN/ DISC CLOSE SELECT TV-/-- MUTING TITLE/ TV/VIDEO RETURN PAGE GROUP CANCEL 5/∞ VOL- VOL+ ENTER PREVIOUS NEXT CLEAR SELECT STROBE SLOW- SLOW+ REPEAT SUB TITLE AUDIO fs/Rate PROGRESSIVE SCAN DIGEST...
Repeat function In the slide show mode, you can repeat playback of JPEG files in a Group or on the disc. STANDBY/ON OPEN/ DISC CLOSE SELECT TV-/-- MUTING TITLE/ TV/VIDEO RETURN PAGE GROUP CANCEL VOL- VOL+ ENTER PREVIOUS NEXT CLEAR SELECT STROBE SLOW-...
Changing the initial settings NOTE Make sure that the TV - DVD switch on the remote control unit is set to “DVD” when using the 5/∞/2/3 and numeric buttons for controlling the unit. Selecting preferences This chapter refers to the settings which are already made when you purchase the unit.
NOTES • To dismiss a preference display: Press CHOICE. • While an MP3 or JPEG disc is loaded, you cannot bring up any preference display. • When a preference display is shown on a wide TV screen, the upper and lower parts of the TV picture sometimes may be cut off.
Changing the initial settings Table of languages and their abbreviations Afar Persian Abkhazian Finnish Afrikaans Fiji Ameharic Faroese Arabic Frisian Assamese Irish Aymara Scots Gaelic Azerbaijani Galician Bashkir Guarani Byelorussian Gujarati Bulgarian Hausa Bihari Hindi Bislama Croatian Bengali, Bangla Hungarian Tibetan Armenian Breton...
PICTURE page PICTURE MONITOR TYPE 4:3 LB PROGRESSIVE MODE AUTO SCREEN SAVER MP3/JPEG SELECT USE 5∞23 TO SELECT, USE ENTER TO CONFIRM TO EXET, PRESS CHOICE. ENTER Menu items MONITOR TYPE You can select the monitor type to match your TV when you playback DVD VIDEO discs recorded for wide screen televisions.
Changing the initial settings Menu items SCREEN SAVER You can select the screen saver function ON or OFF. See page 19 for details about screen saver function. MP3/JPEG The unit can play back MP3 and JPEG files recorded on a CD-R/CD- RW disc, however, if a disc contains both of MP3 and JPEG files, you can only play back files of either type...
Menu items ANALOG OUT To play back a DVD VIDEO disc recorded with surround multichannel audio correctly, this setting must be properly made according to your audio system. D. RANGE COMPRESSION When enjoying a DVD VIDEO disc recorded with the Dolby Digital format at low or middle volume, this setting makes you hear sound comfortably.
Changing the initial settings SPK.SETTING page SPK.SETTING MODE 5.1 CH. SIZE DELAY LEVEL SELECT USE 5∞ TO SELECT, USE ENTER TO CONFIRM TO EXET, PRESS CHOICE. ENTER Menu items MODE You can select the speaker configuration type according to your speaker systems. Normally, set to “5.1 CH.”...
OTHERS page OTHERS RESUME ON SCREEN GUIDE AUTO STANDBY AV COMPULINK MODE DVD1 PARENTAL LOCK SELECT USE 5∞23 TO SELECT, USE ENTER TO CONFIRM TO EXET, PRESS CHOICE. ENTER Menu items RESUME You can select the resume playback mode. ON SCREEN GUIDE The unit can display “on-screen guide”...
Changing the initial settings Making fine tuning for your speakers You can make fine tuning to match your speaker system. This adjustment is available only when “ANALOG OUT” is set to “MULTI CHANNEL” in the “AUDIO” preference display and “MODE” is set to “EXPERT” in the “SPK. SETTING”...
Use 5/∞ to move to [DELAY] and press ENTER. The DELAY display page appears on the TV screen. points to [CENTER SPEAKER]. See page 60 for details about how to bring up the “SPK.SETTING” page. DELAY CENTER SPEAKER 0.0m/ 0ft REAR SPEAKER 0.0m/ 0ft RETURN...
Changing the initial settings Limiting playback by children This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user. For example, if a movie which includes violent scenes supports the parental lock feature, such scenes which you do not want to let children view can be cut or replaced with other scenes.
While points to [SET LEVEL], press ENTER to bring up the pull-down menu. In the pull-down menu, “NONE” and level “1” to “8” are available. “NONE” does not restrict playback. Level “1” is the strictest level. Discs rated higher than the selected level are restricted.
Changing the initial settings Press ENTER to bring up the pull-down menu. The country code whose standards were applied to rate the DVD VIDEO disc should be selected. See “Appendix A: Country/Area code list for Parental Lock” on page 80. Note that if you change the country code, you must reselect the Parental Lock level.
AV COMPU LINK remote control system The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation. If your video/audio player (such as a DVD player, CD player and VCR) and television or/and amplifier/receiver support the JVC AV COMPU LINK system and are tied...
Additional information Troubleshooting What appears to be a malfunction may not always be serious. Please go through the following list before requesting service. POWER Symptom Power does not come on. OPERATION Symptom The remote control unit does not work. The TV/VIDEO - CANCEL, 5/∞/2/3 or numeric buttons do not work.
Page 79
PICTURE Symptom No picture is displayed on the monitor. No picture is displayed on the monitor or the screen is blurred or divided into two parts. A picture is noisy or blurred. A picture does not fit the television screen. The upper and lower parts of the preference display are cut off when using wide-aspect TV.
Additional information Frequently Asked Questions Question Can I play back DVD VIDEO and Video CD purchased abroad? Can I play back a DVD VIDEO disc without any Region Code number? Can I play back a CD-R/RW disc with still pictures in other than the JPEG format? Can I play back audio on a disc labeled “Dolby Digital EX”?
Specifications *Specifications and appearance subject to change without prior notice. General Readable discs: DVD AUDIO, DVD VIDEO, DVD-R (Video format), SVCD, Video CD, Audio CD (CD-DA), MP3 Format, JPEG, CD-R/RW (CD-DA, SVCD, Video CD, MP3 Format, JPEG) Video format: NTSC, 480i (Interlaced scan)/480p (Progressive scan) selectable Other Power requirements: AC 120 V...
Additional information Appendix A: Country/Area code list for Parental Lock This list is used for the Parental Lock operation. For details, see page 70. Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania AM Armenia Netherlands Antilles Angola Antarctica Argentina American Samoa Austria...
(the single rear channel is usually played through two speakers). Down-mix Internal stereo mix of multichannel surround audio by a DVD player. The down-mix signals are output from stereo output connectors. Additional information A Digital Surround audio encoding format configured with six (5.1) channels, similar to Dolby Digital.
Page 84
Progressive scan Progressive scanning displays all the horizontal lines of a picture at one time, as a single frame. A progressive-scanning DVD player converts the interlaced (480i) video from DVD into progressive (480p) format for connection to a progressive display.
To prevent electrical shock,do not open the cabinet.There are no user serviceable parts inside.Please refer to qualified service personnel for repairs. Accessories To purchase accessories for your JVC product,please call toll free:1 (800)882-2345 or on the web at www.JVC.com BT-51005-5...
Page 87
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be given to you by the toll-free number.
Page 88
VICTOR COMPANY OF JAPAN, LIMITED 0502YIYMDWJEM...