Table of Contents
Advertisement
Basic operations
3 Placeone or two discs in the disc tray(s).
With the label side up
• To insert an 8-cm
disc, place it in the
inner recess.
4 Repeat steps 2 and 3 if you wish to set one or more discs to other disc trays.
5 Press A 0PEN/CLOSE to close the carousel.
The carousel closes and the DISC 1 to 7 indicators
corresponding
to the loaded disc numbers
are turned on.
The disc set in the front-left
tray when the carousel closes is loaded for playback. If no disc is set in the front-left
tray
when the carousel
closes, the unit rotates the carousel clockwise
until it finds a disc for loading.
The unit reads the disc information
and the opening
display appears on the TV screen (see page 14).
When
a DVD AUDIO disc is loaded, the DVD AUDIO indicator
lights in blue.
If a menu is shown on the TV screen
When inserting a DVD AUDIO, DVD VIDEO, SVCD, or Video CD disc, a menu display may be automatically
shown on
the TV screen (see pages 30, 31). From a menu, you can select a desired item to be played back by following
the
procedure
below.
(for DVD AUDIO/DVD VIDEO)
1
Use A/_'/_/_
to select a desired item.
2 Press ENTER.
The unit starts playback of the selected item.
(for SVCD/Video CD)
Use the numeric
buttons to select a desired
item.
The unit starts playback of the selected item.
NOTES
• Do not load a non-playable disc.For details about playable and non-playable disc types, see page 4.
• When loading a disc on the tray, be sure to position the disc inside the recess.Otherwise, the disc may be damaged when the
carousel is closed,or the disc may not be removed from the unit.
• Do not use any stabilizer when playing back a disc.
• With some DVD VIDEO discs,the unit starts playbackautomatically after inserting the disc.
• If you insert a DVD VIDEO disc whose region code does not match the unit, "REGION CODE ERROR!" is shown in the opening
display. For detail about the region code, see page 4.
18
Advertisement
Table of Contents
