Convect Bake; Convect Roast - Jenn-Air JDS9860CDB Use & Care Manual

Dual fuel modular downdraft slide-in range
Table of Contents

Advertisement

Available languages

Available languages

Test baked goods for doneness a few minutes before the
minimum cooking time with a method such as using a
toothpick.
Burn Hazard
Use an oven mitt to remove temperature
probe.
Do not touch broil element.
Failure to follow
these instructions can result in burns.
Use a meat thermometer
or the temperature
probe (on some
models) to determine the doneness of meats and poultry.
Convect Bake can be used to bake and cook foods on single or
multiple racks. It is helpful to stagger items on the racks to allow
a more even flow of heat. If the oven is full, extra cooking time
may be needed.
When cooking an oven meal with several different types of foods,
be sure to select recipes that require similar temperatures.
Cookware should sit in the oven with at least 1" (2.5 cm) of space
between the cookware and the sides of the oven.
Allow the range to preheat before placing food in the oven.
During convection
baking preheat, the broil elements and the
bake element all heat the oven cavity. After preheat, the
convection
element will cycle on and off in intervals to maintain
oven temperature, while the fan constantly circulates the hot air.
If the oven door is opened during convection
baking or
preheating, the convection element and fan will turn off
immediately. They will come back on once the door is closed.
Reduce recipe temperature 25°F (14°C). The cook time may
need to be reduced also.
To Convect
Bake:
Before convection
baking, position racks according to the
"Positioning
Racks and Bakeware" section.
1. Press CONVECT.
2. Select CNVT BAKE using the left Quickset pad.
3. Select the oven temperature using the Quickset pads.
OR
Press the number pads to enter a temperature. The
temperature can be set between 195°F and 550°F (91°C and
288°C) in 5 ° increments when Auto Convect is on. If Auto
Convect is off, temperature
can be set from 170°F (77°C).
4. Press ENTER.
After 3 seconds, the oven will begin to preheat. "CNVT
BAKE" and "PREHEAT" will appear in the display along with
100 ° or the actual oven temperature,
whichever is higher.
The temperature
in the display will increase in 1° increments
until the oven reaches the preset temperature.
Allow about
15 minutes for the oven to preheat.
5.
6.
When the oven is preheated, the oven will beep, "PREHEAT"
will turn off and "CNVT BAKE" will be displayed. "AUTO" will
be displayed if Auto Convect conversion feature is turned on.
Place food in the oven.
Press CANCEL when finished cooking.
Co
V@C_ _ @_:_s<_'_
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Convection Roast can be used to roast meat and poultry, and
vegetables.
To Convect
Roast:
Before convection roasting, position racks according to the
"Positioning
Racks and Bakeware" section. It is not necessary to
wait for the oven to preheat before putting food in, unless
recommended
in the recipe. If a recipe suggest preheating the
oven, add 15 minutes to the cook time.
1. Place food in the oven.
2. Press CONVECT.
3. Use the right Quickset pad to scroll to CNVT ROAST.
4. Select CNVT ROAST using the left Quickset pad.
5. Select the oven temperature using the Quickset pads.
OR
Enter the desired temperature using the number pads.
The temperature
can be set between 170°F and 550°F
(77°C and 288°C).
6. Press ENTER pad to set.
7. Select the cook time using the Quickset pads.
OR
Enter the desired cook time using the number pads.
NOTE: If Auto Convect is off, a roast time will not be required.
8. Press ENTER pad to set.
After 3 seconds, the oven will begin to heat. "CNVT ROAST"
will appear in the display along with "100 °'' or the actual oven
temperature,
whichever is higher.
The temperature
in the display will increase in 1o increments
until the oven reaches the preset temperature.
Cook time will begin to count down.
9. At 75% of the cooking time the oven will beep to let you know
to check food. Check food using a meat thermometer.
If food is done, take food out of oven and press CANCEL pad
to turn oven off.
If food is not done, continue roasting.
Once the set time has elapsed the oven will automatically
go
into Keep Warm mode for 1 hour and then shut off. If food is
taken from the oven before the hour has elapsed, press the
CANCEL pad.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents