Goldstar M1203R Owner's Manual page 5

• CAUTION
When the air conditioner has been performing its cooling operation and is tu;rned off or set to the fan
position, wait at least 3 minutes before resetting to the cooling operation again.
FUNCTION
POWER BUTTON
To turn the air conditioner ON, push me button. Toturn the air conditioner OFF, push the button again.
This button takes priority over any other buttons.
OPERATION r/lODE SELECTION BUTTON
Every time you push this button, it will toggle COOL, FAN and DRY.
ON/OFF TIMER BUTTON
Everytime you push this bu_on, timer is set as follows.(1 Hour _ 2Hours _ 3Hours --) 4Hours
5Hours _ 6Hours _ 7Hours _ 8Hours _ 9Hours _ 10Hours _ 11 Hours --) 12Hours _ Cancel)
FAN SPEED SELECTOR
Everytime you push this button, it is set as follows. (Hi[ F3] -) Low[ F l] -3' Med[ F2] -') Hi[F 3]....)
ROOM TEMPERATURE SETTING BUTTON
This button can automatically _ntrol the temperature of the room.
The temperature can be set within a range of 60°F to 86°F by 1 °F.
Select the lower number for lower temperature of the room.
ENERGY SAVER: (It is operated by only remote controller.)
The fan stops when the _mpressor sto_ cooling.
Approximately every 3 minutes the fan will turn on and check the room air to determine if _oling is
need_.
REMOCON SIGNAL RECEIVER
-5-