Goldstar M1203R Owner's Manual page 12

3. Looselyassemblethe sillsupportusingthe
parts in Fig.3.
4. Selectthe positionthatwill placethesill
supportnearthe outermostpointon sill
(SeeFig.4)
NOTE: Be careful when you install the cabinet
(frame guides @ are broken so easily).
5. Attach the sill support to the cabinet track hole
in relation to the seiected position using
2 Type A screws in each support(See Fig. 4).
6 The cabinet should be installed with a very
slight tilt(about 1/2") downward toward the
outside (See Fig. 5),
Adjust the bolt and the nut of sill support for
baJancing the cabinet.
7, Attach the cabinet to the window stool by
driving the screws (_(Type B: Length sixteen
millimeters and below.) through the front angle
into window stool.
8. Pull each Frame curtain fully to each window
sash track, and repeat step 2.
9. Attach each Frame curtain the window sash
using screws ®(Type C).
(See Fig, 6)
Frame Guide @
IND_
Screw(Type A) @
• io ....
a r _i
Fig, 4
Screw(Type B)
Sill support
Sil_ suppod_
Front Angle
_rew(Type B)
Fig. 5
Fig, 6
_12-