ATTACHHOSE
Hose
must
be connected
as shown
for ag
operations,
1.8 Slide hose(A) into dirt duct(B) and twist hose to
lock it into place.
1.9 Position hose over hose {nook(b) and into hose
tube (E).
POSITION TOOLS
1,t0 Place smaller unr_dged end of wand into bot-
tom of rack. Snap wand into clip. Repeat with other
wand.
1.11 For models
with tools on back, snap ends
of dusting
brush (A), crevice tool (B) and furniture
nozzle (C) into clips as shown.
!
jB
,,1
VACUUM DESCRIPTION
1. Handle
2,
Cord Hooks: wrap cord around
hooks for storage. The top hook
can be rotated i_ght or left for
easy cord release.
3.
Hose
4. ON!OFF
Switch: located on left
rear comer of cleaner body
5. Carry Handle
6.
Bag Door
7. Stair Cleaning
Handle: located
on [ower edge of bag door
8.
Handle Release Lever: step on
lever to lower handle to operating
or low positions
9, Headlight*
10. Nozzie Control Knob: slide knob
to correct setting for height of
carpet being cleaned
11. Furniture Guard: he}ps prevent
cleaner from marking furniture
12, Embedded DirtFINDER
TM
display*
13. DirtFINDER
TM
Sensitivity Sw_tch*
14. Wands
15. Check Bag indicator"
16. Final Filter Exhaust
17. Dusting Brush
18. Crevice Tool*
19. Furniture Nozz[e
20. Hose Hook
*Available on select models only.
Foot design may vary per model.