Hoover UH30015 Owner's Manual page 11

FILTERBAG:
Howto Replace
CAUTION ,&
To reduce the risk of injury from moving parts,
unplug vacuum before servicing.
4.1 To change tilter bag, push down at top of bag
door and pull door forward. Remove door.
4.2 Grasp tilter bag collar (A) and pull collar from
tube (B).
Do not clean out old filter bag and reuse.
Discard used filter bag_
Hold new filter bag as shown, Align opening in
filter bag with (B). Push (A) firmly onto (B). Tuck
in filter bag.
4.3 Reposition bag
door by placing tabs on
bottom of door into
opening (C).
Press top of door to
snapsecurely shut.
FILTERS:How to
Clean
CAUTION
To reduce the risk of injury from moving parts,
unplug vacuum before serv{cing.
DO not operate cleaner without either the
secondary or final filter in placer
Secondary Filter
4.4 The secondary filter (A), located behind the grill
in the bottom of bag compartment, protects the
motor from dirt particles.
If filter becomes dirty, pull off grifl and lift out tilter.
Hand wash filter in cold water with mild detergent,
then air dry. Reposition dry filter and grill°
Final Filter
The final tilter assists in the filtration process to
return clean air to the room.
4.5 To remove this filter when it be.-comes dirty,
remove bag door and pull down top of filter.
4.6 Lift out filter (B) and hand wash it in cold v,,ater
with mild detergent.
Let filter air dry and reposition it on the side of the
cleaner. Reposition bag door.
1t