Troy-Bilt OEM-290-253 Installation Instructions Manual page 17

Step 1: Move the two left-
curved tines (labelled "A" in
Figure 28) from the left outer
holder to the "B" position on the
right outer holder. Move the two
left-curved tines which were at
the "B" position to "A."
Step 2: Move the two right-
curved tines from position "C"
on the left inner holder to the
"D" position on the right inner
holder. Move the two right-
curved tines which were at the
"D" position to "C." See Figure
29.
Step 3: Move the two left-
curved tines from the "E"
position on the left inner holder
to the "F" position on the right
inner holder. Move the two left-
curved tines which were at the
"F" position to "E." See Figure
30.
Step 4: Move the two right-
curved tines from position "G"
on the left outer holder to the
"H" position on the right outer
holder. Move the two right-
curved tines which were at the
"H" position to "G." See Figure
31.
I MPORTANT: Make sure
that the cutting edges on all
tines will enter the soil first
when the tiller is moving
forward.
A
Figure 28: Exchanging position of tines at "A" and "B."
C
Figure 29: Exchanging position of tines at "C" and "D."
E
Figure 30: Exchanging position of tines at "E" and "F."
G
Figure 31: Exchanging position of tines at "G" and "H."
B
D
F
H
17