Advertisement
Quick Links
HORSE TILLER
INTRODUCTION
Thank you for buying the Horse Tiller Dozer/Snow Blade. This
blade is a versatile tool that helps to make your tiller an "all-sea-
son" machine. To ensure safe and proper installation of the
blade, please read and carefully follow all instructions.
UNPACK AND CHECK PARTS
Check the contents of the shipping carton against the Parts List
below.
Ref. Part No.
Description
1
GW-1157
Dozer/Snow Blade. . . . . . . . . . . . . . . . 1
2
1909773
Swivel Bracket, (A-Frame) . . . . . . . . . 1
3
736-0921
Lockwasher, 1/2". . . . . . . . . . . . . . . . . 1
4
710-3181
Hex Head Bolt, 1/2--13 x 1-1/2, . . . . . 1
5
1909774
Blade Mounting Brack. . . . . . . . . . . . . 1
6
712-0267
Hex Head Nut, 5/16-18 . . . . . . . . . . . . 5
7
736-0119
Lockwasher, 5/16 . . . . . . . . . . . . . . . . 5
8
736-0275
Washer, Plain, 5/16. . . . . . . . . . . . . . . 2
1
Figure 1: PARTS LIST
®
Dozer/Snow Blade Attachment
ASSEMBLY STEPS
NOTE: Your unit must have the Bumper/Guard attachment
(OEM-290-255/290-255-081) installed before installing the
Dozer/Snow Blade. Refer to the separate Bumper/Guard Attach-
ment kit for installation instructions.
To prevent personal injury or property damage, do not
start the engine until all assembly steps are complete and
you have read and understand the safety and operating
instructions in this Instruction and in the tiller Owner's
Manual.
Qty.
Ref. Part No.
9
10
11
12
13
14
15
16
16
2
12
15
4
14
11
10
Model 290-259-081 / OEM-290-259
WARNING
Description
1100779
Hex Head Screw, 5/16-18 x 1-3/4 . . . . 4
1186233
Hex Nut, 1/2". . . . . . . . . . . . . . . . . . . . 1
GW-1416
Bushing . . . . . . . . . . . . . . . . . . . . . . . 1
1100257
Flat Washer, 1/2" . . . . . . . . . . . . . . . . . 1
710-0874
Hex Head Screw, 5/16-18 x 1-1/4 . . . . 1
1100057
Hex Head Screw, 1/2-13 x 3 . . . . . . . . 1
712-0384
Hex Locknut, 1/2 x 13. . . . . . . . . . . . . 1
GW-1158
Index Pin. . . . . . . . . . . . . . . . . . . . . . . 1
13
6
7
6
8
3
9
7
10
Qty.
7
9
5
Advertisement
Related Manuals for Troy-Bilt Horse Tiller OEM-290-259
Summary of Contents for Troy-Bilt Horse Tiller OEM-290-259
- Page 1 ® Dozer/Snow Blade Attachment Model 290-259-081 / OEM-290-259 HORSE TILLER INTRODUCTION ASSEMBLY STEPS Thank you for buying the Horse Tiller Dozer/Snow Blade. This NOTE: Your unit must have the Bumper/Guard attachment blade is a versatile tool that helps to make your tiller an “all-sea- (OEM-290-255/290-255-081) installed before installing the son”...
- Page 2 2. Using the hardware included in this attachment, install the WARNING Blade Mounting Bracket (5, Figure 1) to the lower bumper with two nuts (6, Figure 1), two lock washers (7, Figure 1), To help avoid serious personal injury, disconnect the spark two flat washers (8, Figure 1) and two 5/16"-18 x 1-3/4"...
- Page 3 3. Insert a 1-1/4" screw (13, Figure 1) through the lower, small- er hole in the swivel bracket. Add a lock washer (7, Figure 1) and hex nut (6, Figure 1) and tighten securely. See Figure 6. Figure 8: SETTING THE BLADE ANGLE Please refer to the Horse Tiller Owner’s Manual for handlebar Figure 6: ATTACHING THE SWIVEL BRACKET (A-FRAME) height setting instructions.
- Page 4 IMPORTANT: Check engine oil level frequently during snow- plowing or earth dozing. Figure 1 For customer assistance, visit www.troybilt.com, contact your nearest authorized dealer or: TROY-BILT LLC, P.O. BOX 361131, CLEVELAND, OHIO 44136-0019, 1-866-840-6483 Printed in U.S.A. Form 769-00134 (03/2002)