Advertisement
ALWAYS
wear safety glasses and protective
gear n ear battery. Use insulated
tools.
DO NOT T IP battery beyond a45 °angle i n
any direction.
ALWAYS
keep b atteries
out o freach of
children.
Battery posts, terminals
and related
accessories
contain lead a nd lead
compounds,
chemicals
known tothe State of
California
tocause cancer and reproductive
harm. Wash h ands after h andling.
ALWAYS
block wheels and know all j ack
stands are strong and secure and will h old
weight ofunit d uring maintenance.
Release
pressure
slowly from components
with stored energy.
NEVER attempt tomake a ny adjustments
to
unit while e ngine isrunning (except where
specifically
recommended).
Stop e ngine,
remove key orspark plug w ire and wait f or a ll
moving parts tostop b efore servicing
or
cleaning.
Check parking brake operation
frequently.
Adjust and service asrequired.
ALWAYS
maintain unit i nsafe o perating
condition.
Damaged
orworn o ut m uffler can
cause fire orexplosion.
Maintain
orreplace safety and instruction
labels, as necessary.
NEVER store u nit with fuel i nfuel tank, inside
abuilding where a ny ignition sources are
present.
Shut off f uel and allow engine tocool
completely
before storing inclosed area o r
covering unit.
Clean grass and debris from unit, especially
from around muffler and engine, tohelp
prevent fires.
For e xtended
storage, shut off f uel and clean
unit t horoughly.
See e ngine manual for p roper
storage.
Lower cutting deck u nless apositive
mechanical
lock isused.
Use only a ttachments
oraccessories
designed
foryour unit.
Check allhardware
atregular intervals,
especially
blade attachment
bolts. Keep all
hardware
properly tightened.
=1 :] wl
A
WARNING: AVOID INJURY.
Read and understand entire
Safety section before proceeding.
UNIT ASSEMBLY
Package Contents:
Unit, Mower Deck and Literature Pack
Preparation
Checklist
Refer to the Owner/Operator
manual as
required.
1. Unpack Unit - Remove shrink wrap and
packaging materials.
2. Remove Unit From Container - Open
Bypass Valves (dump valves) (See
Moving the Unff with the Engine Off on
page 15).
Push unit from container onto a level
surface. Close the bypass valves.
3. Tires - See Specifications
on page 32.
A
CAUTION:
Avoid injury! Explosive
separation of tire and rim parts is
possible when they are serviced
incorrectly:
Do not attempt to mount a
tire without the proper
equipment and experience
to perform the job.
Do not inflate the tires
above the recommended
pressure.
Do not weld or heat a wheel
and tire assembly. Heat can
cause an increase in air
pressure resulting in an
explosion. Welding can
structurally weaken or
deform the wheel.
Do not stand in front or over
the tire assembly when
inflating. Use a clip-on
chuck and extension hose
long enough to allow you to
stand to one side.
GB-9
Hide quick links:
Advertisement
