Download Print this page

Ariens 991073-Max Zoom 48 Owner's Manual

Max zoom series

Advertisement

MAX Zoom _"
Owner/Operator
Manual
Models
991073
- Max Zoom 48
991074
- Max Zoom 52
991075
- Max Zoom 60
_
_
ENGLISH
FRAN(_AIS
03994900
10/09
Printed in USA

Advertisement

loading

Summary of Contents for Ariens 991073-Max Zoom 48

  • Page 1 MAX Zoom _" Owner/Operator Manual Models 991073 - Max Zoom 48 991074 - Max Zoom 52 991075 - Max Zoom 60 ENGLISH FRAN(_AIS 03994900 10/09 Printed in USA...
  • Page 2: Table Of Contents

    Model and Serial numbers of your unit and engine. idiomas diferentes del ingles en su distribuidor. Visite a su distribuidor Numbers are located on the product o vaya a www.ariens.com para registration form in the literature package. They are printed on a serial number label, obtener una lista de idiomas disponibles para su equipo.
  • Page 3 (Off). Engine must stop if operator PRODUCT REGISTRATION leaves seat when steering levers are in any drive position or PTO is engaged The Ariens dealer must register the product (On). See Safety Interlock System on at the time of purchase. Registering the page 12.
  • Page 4: Safety

    [,."Y-,1 _1 =1i'd WARNING: POTENTIALLY WARNING: This cutting machine HAZARDOUS SITUATION! If not is capable of amputating hands and feet and throwing objects. avoided, COULD RESULT in Failure to observe the safety death or serious injury. instructions in the manuals and on decals could result in serious injury or death.
  • Page 5 Figure 2 OF1625 • DANGER! TO AVOID SERIOUS INJURY OR DEATH across. DO NOT operate on slopes Go up and down slopes, not over 10 °. Read Owner/Operator Manual. OL4450 OL180I If machine stops going uphill, stop I0 ee chi'drenan blade and back down slowly.
  • Page 6 Shut off e ngine, remove key, ALWAYS remove key and/or wire from spark plug before assembly. Unintentional engine orrepair unit. start up can cause death or serious injury. read m anual before you adjust Complete a walk around inspection of unit and work area to understand: OL4010 •...
  • Page 7 DO NOT w ear loose c lothing orjewelry and Use care w hen a pproaching blind c orners, tieback h air t hat m ay g et c aught inrotating shrubs, trees o rother objects that m ay obscure vision. parts.
  • Page 8 Disengage PTO when a ttachment isnot i n This product is equipped with an internal use. ALWAYS turn off p ower toattachment combustion type engine. DO NOT use unit on when t ravelling, crossing driveways, etc. or near any unimproved, forest-covered Mow upand down s lopes, not a cross them.
  • Page 9: Assembly

    ALWAYS wear safety glasses and protective ALWAYS maintain unit i nsafe o perating gear n ear battery. Use insulated tools. condition. Damaged orworn o ut m uffler can cause fire orexplosion. DO NOT T IP battery beyond a45 °angle i n any direction.
  • Page 10 (Figure 14) on page 23. improper operation can result in severe personal injury. 11. Lubrication - Lubricate all fittings per maintenance label under seat and check hydrostat oil level (See Ariens does not recommend jump-starting your unit. Jump-starting can damage engine and electrical system components.
  • Page 11 [o_o_o_,,."] _-'N _ IJ]I_ __,_n n L U _t_'! Figure 4 OF_lO OF4_O 1. Fuel Tanks and Caps 9. Battery 10. Fuel Shut Off Valve 2. Steering Levers 11. Mower Lift Pedal 3. Hydraulic Oil Reservoir 12. Mower Deck 4. Ignition Switch 5.
  • Page 12: Controls And Features

    D. To turn right, pull the right back or your Ariens dealer for repairs. push the left steering control lever NOTE: When the parking brake is engaged, forward or a combination of both.
  • Page 13: Operation

    Throttle Lever Cutting Height: Put cutting height adjustment pin in desired The throttle lever changes hole. Push mower lift pedal forward and hold the engine speed. Move it while pushing down on the lift lock. Slowly the throttle lever to Fast (1) lower mower lift pedal until deck lift contacts to increase engine speed.
  • Page 14 FILLING FUEL TANK Fuel Stabilizer Gasoline left in the fuel system for extended periods without a stabilizer will deteriorate, WARNING: AVOID INJURY. resulting in gum deposits in the system. Read and understand entire These deposits can damage the carburetor Safety section before proceeding. and the fuel hoses, filter and tank.
  • Page 15 STARTING AND SHUT OFF 6. Move throttle control to fast. 7. Move the steering levers forward to obtain a slow ground speed. CAUTION: Read entire 8. To disengage the mower, move the PTO Owner/Operator Manual, Clutch switch to the "Off" position. Manual, and Engine Manual first.
  • Page 16 FOR BEST PERFORMANCE Cut grass when it is dry. Keep mower blades sharp. Keep mower deck properly levelled. Adjust anti-scalp rollers to prevent scalping. Do not set height of cut too low. For very tall grass, mow twice. Do not travel too fast. Mow with the engine set at full throttle.
  • Page 17 Period Service Task Check Safety Interlock failure and improper operation of unit can ARNING: Safety interlock system result in death or serious injury. Test this system each time the unit is operated. this system does not function as described, do not operate until repairs are made.
  • Page 18 1. Place unit on a flat level surface. peak efficiency. Should engine service be ALWAYS stop engine. Ensure unit is required, it can be obtained from a Ariens secure and will not tip over. Strap and Dealer or the engine manufacturer's clamp onto lift if used.
  • Page 19 To Add Hydraulic Fluid: 1. Remove the cap from the expansion tank. 2. Fill the expansion tank with 20W-50 engine oil with an SL API classification until oil level reaches the cold fill line on the tank. 3. Install the expansion tank cap and then purge the system.
  • Page 20 8.Repeat steps 1 -7 forthe other 7. Repeat steps 2-6 until the transaxles transaxle. operate smoothly in forward and reverse 9.Follow t he instructions at normal speeds without excessive To Add noise. Hydraulic Fluid: on page 19. MOWER BLADES Remove AUTION: Use sturdy gloves or padding to protect hands when working with mower blades.
  • Page 21 Sharpen the Mower Blades BATTERY mower blades while on unit. An CAUTION: DO NOT sharpen Read and understand entire WARNING: AVOID INJURY. unbalanced mower blade will Safety section before proceeding. cause excessive vibration and eventual damage to unit. Check mower blade balance before reinstalling blades.
  • Page 22 4. Charge battery according to charger and battery manufacturers' instructions. 5. Replace battery. See Replace Batteryon page 21. Jump-Starting Ariens does not recommend jump-starting your unit. Jump-starting can damage engine and electrical system components. See your engine manual for more detailed information.
  • Page 23 3.Remove the drive w heels from the unit. Aligning the Steering Levers 4.Start the engine, run engine atfull (Figure 14) throttle, and release the parking brake. 1. Shut OFF engine. Engage parking 5.Move t he steering levers from Forward brake. Remove the ignition key. toReverse several times tomake s ure 2.
  • Page 24: Specifications

    ADJUSTING THE UNIT TO TRACK ADJUSTING THE HEIGHT OF THE STRAIGHT STEERING LEVER HANDLES The handles have three height positions (Figure 16). WARNING: Prior to adjusting the tracking of the unit, shut OFF engine, engage parking brake, and remove the ignition key. Check and adjust tire pressure.
  • Page 25 Check Adjustment CAUTION: DAMAGED NOTE: Be sure to check the parking brake on both sides of the unit (Figure 17). WORN BELTS may result in injury and/or damage to unit. 1. Engage parking brake and set both Check belts for excessive wear or transmission bypass valves to the cracks often.
  • Page 26 4.Remove short mower belt f rom right PTO Idler Spring Length blade s pindle and from deck. Idler pivot bolt m ust beloosened slightly togain clearance toremove belt f rom under idler p ulley (Figure 19). 5.Arrange new mower belt(s) ondeck (short belt f irst).
  • Page 27 Lowest Cutting Height Cutting Height Figure 22 Removing the Mower Deck 1. Remove PTO belt (See Replacing Mower Belts on page 25). WARNING: AVOID INJURY. Mower lift arms and mower lift pedal could cause severe injury if they are not locked before removing the mower deck.
  • Page 28 Check Blade Level and Pitch 1. Raise mower deck to a 3 in. (7.62 cm) cutting height. 2. Shut off engine. Engage parking brake. Remove the ignition key. NOTE: Place blocks under the bottom edge of the deck, not under the reinforcement welded along deck face.
  • Page 29 CLUTCH ADJUSTMENT Blade Side-to-Side Level If clutch fails to engage or disengage properly or begins to make abnormal noise, check the air gap adjustment at the three inspection slots. To check: 1. Stop engine, remove key and wait for all hot parts to cool.
  • Page 30 Store unit in a cool, dry protected area. LONG TERM Clean unit thoroughly with mild soap and low pressure water and lubricate (See Ariens does not recommend jump-starting your unit. Jump-starting can damage engine and electrical system components.
  • Page 31 Part No. Description 79100400 Mulching Kit 4 8-inch Decks 79206400 Mulching Kit52-inch Decks 79206500 Mulching Kit60-inch Decks 79206700 Striper Kit 79100700 Discharge Cover Kit 4 8-inch Decks 79100800 Discharge Cover Kit 5 2-inch Decks 79206800 Discharge Cover Kit60-inch Decks 79202700 Headlight 79102500 Bagger Adapter Kit - 60-inch...
  • Page 32 Model Number 991073 991074 991075 Model Max Zoom 48 Max Zoom Max Zoom Kawasaki Engine Engine Model Number FR691 FR730 Engine Displacement- 44.3 (726) in 3 (cc) Governed RPM (May be different from maximum 3600 + 75 RPM) Liquid or Air Cooled Speed Forward Maximum - mph 8.0 (12.9)
  • Page 33: Warranty

    AMP series electric riding mowers is/are warranted to the original purchaser for two years from the date of purchase. Ariens will replace, free of charge to the original purchaser, any battery pack and/or battery subassembly that fails due to defect in material or workmanship for one year after the date of purchase.
  • Page 34 If the applicable warranty period is more than 90 days, Ariens will cover the prorated cost of any defective battery, for up to 12 months after the date of purchase. This battery limited warranty does not apply to the battery packs on AMP series products.
  • Page 35 Ariens Company 655 West Ryan Street Brillion, WI 54110-1072 920-756-2141 Fax 920-756-2407 www.ariens.com ,& WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

This manual is also suitable for:

991074-max zoom 52991075-max zoom 60