Troubleshooting
The unit will not turn ON
Confirm that the POWER switch is set
to "ON". When using bus power, set the
switch to "OFF" before connecting the
USB cable.
still have a charge.
No sound or very low volume
W he n a d ju s tin g the vo lu m e w i th an
expression pedal, make sure that a suitable
volume setting has been set with the
pedal.
(
P26).
→
There is a lot of noise
The sound distorts strangely/has an odd timbre
the output equipment (
to the type of guitar pickups or the device
connected directly to the
(
P5).
→
58
P4–5).
→
P16).
→
P20).
→
P21).
→
/
An effect is not working
I f t h e ef fe c t p ro c e s s i n g c a p a c i t y i s
exceeded, "DSP Full!" appears on the
effect graphic. In this case, the effect is
bypassed (
P10).
→
The expression pedal is not working well
(
P18).
→
The recorded level in a DAW is low
Batteries lose their charge quickly
manganese batteries. Alkaline batteries
should provide 6 hours of continuous
operation.
enable the remaining charge to be shown
more accurately.
P37).
→
P25).
→
P23).
→