Zoom G3 Operation Manual page 10

Adjusting effects
4
To change the page
Effect processing capacity
NOTE
processing power whether it is on or off.
10
The / allows you to combine six effects as you like. However, if you
combine effect types that require great amounts of processing power (amp
models, for example), the available processing capacity might not be enough. If
the processing required for an effect exceeds the available capacity, the effect is
bypassed and a "DSP Full!" message appears. This can be avoided by changing one
or more of the effect types or setting them to THRU.
HINT
Press and hold the button for at least one
second to immediately set an effect to THRU.