Effect Types And Parameters - Zoom G2.1Nu Operation Manual

Effect Types and Parameters
Effect type name
When the module is
ON, use the effect
type [▼]/[▲] keys to
select.
Delay
This long delay has a maximum length of 5000 mS.
Echo
This tape echo simulation has a long delay with a maximum length of 5000 mS.
The four effect types above have the same parameters.
PARM1
Time
Sets the delay time.
Tap
You can use the TAP key to set a parameter that has this icon shown next to it. When a module/effect
type with this option is selected in EDIT mode, the parameter interval (modulation frequency, delay
time, etc.) can be set by repeatedly tapping the TAP key.
Tempo mark
When a note mark is shown next to a parameter, the tempo set using the GLOBAL menu (→P30) can
be synchronized to note intervals. For example, if the Time Parameter of the DELAY module is set to
an 8th note, the delay time will be equivalent to an 8th note at the current tempo.
Expression pedal
When a pedal icon is shown next to a parameter, it can be controlled with an expression pedal. If you
set the module to be controlled by the expression pedal (→P27), you can control the parameter in real
time when you select a patch that uses it. With the G2Nu, you will need to connect an external
expression pedal (FP01/FP02).
Delay tap, hold delay and delay mute
Effect types that show these icons allow you to use a foot switch to set the delay time (DELAY TAP), to
turn the hold delay function ON/OFF (HOLD) and to turn the DELAY module input mute ON/OFF
(MUTE). To use these functions, you must connect a foot switch, set the function (→P26) and activate a
compatible effect type.
Note: Manufacturer names and product names mentioned in the following table are trademarks or registered trademarks of
their respective owners. The names are used only to illustrate sonic characteristics and do not indicate any affiliation with
ZOOM CORPORATION.
ZOOM G2Nu/G2.1Nu
Module knob
Shows the position to
recall the module.
Module name
DELAY module
This delay module allows the use of a hold function.
PARM2
1 – 5000 mS
F.B
(feedback)
Adjusts the feedback amount.
Parameters 1–3
Shows the effect parameters that
can be adjusted with Parameter
knobs 1–3 and their setting ranges.
PARM3
Mix
0 – 100
Adjusts the amount of effected
sound that is mixed with the
original sound.
0 – 100
33