Related Manuals for Zoom G2
Summary of Contents for Zoom G2
- Page 1 Operation Manual © ZOOM Corporation Reproduction of this manual, in whole or in part, by any means, is prohibited.
-
Page 2: Table Of Contents
Never open the case of the G2 or attempt to modify the product in any way since this can result in damage to the unit. Volume Do not use the G2 at a loud volume for a long time since this can cause hearing impairment. ZOOM G2 ZOOM G2 Contents SAFETY PRECAUTIONS Usage Precautions ... -
Page 3: Features
Features Thank you for selecting the ZOOM G2 (hereafter simply called the "G2"). The G2 is a multi effect processor with the following features and functions. ● Latest processing technology for outstanding performance 96 kHz / 24 bit sampling (with 32 bit internal processing) assures excellent sound quality. Frequency response remains flat up to 40 kHz, and input-converted signal-to-noise ratio is an amazing 120 dB, demonstrating the high level of performance achieved by the G2. -
Page 4: Controls And Functions / Connections
Shows patch numbers, setting values, and other information about operating the G2. AC adapter [DC IN] jack An AC adapter (ZOOM AD-0006) with a rated output of 9 volts DC, 300 mA (center minus plug) can be plugged into this jack. [POWER] switch Turns the unit on and off. -
Page 5: Selecting A Patch
Selecting a Patch To try out the various effects of the G2, we recommend that you simply play your instrument while switching patches. Turn power on Use a monaural shielded cable to connect the guitar to the [INPUT] jack of the G2. -
Page 6: Using The Tuner
Using the Tuner The G2 incorporates an auto-chromatic tuner. To use the tuner function, the built-in effects must be bypassed (temporarily turned off) or muted (original sound and effect sound turned off). Switch to bypass or mute Setting the G2 to the bypass state In play mode, press both [W]/[Q] foot switches together briefly and release. -
Page 7: Using The Rhythm Function
Using the Rhythm Function The G2 has a built-in rhythm function that plays realistic drum sounds in various patterns. The rhythm function is available in play mode or in the bypass/mute condition. Set the G2 to play mode If the Module selector is set to a position other than "PLAY", set it to "PLAY". -
Page 8: Editing A Patch
Editing a Patch The patches of the G2 can be freely edited by changing the effect parameter settings. Try editing the currently selected patch to create your own sound. Select the effect module Turn the Module selector to select the effect module to edit. -
Page 9: Storing/Copying Patches
ZOOM G2 Storing/Copying Patches Press the [STORE] key once more When the store/copy process is completed, the G2 returns to the previous mode, with the target patch being selected. Specify the store/copy target patch number To specify the store/copy target patch... -
Page 10: Using An Optional Foot Switch Or Pedal
Using an Optional Foot Switch or Pedal The G2 is equipped with a [CONTROL IN] jack designed for connection of an optional foot switch or expression pedal. This section explains how to use these accessories. ● bP (bypass/mute) Using the foot switch (FS01) The foot switch controls bypass or mute on/off. -
Page 11: Restoring Factory Defaults
Linking Effects The patches of the G2 consist of nine serially linked effect modules, as shown in the illustration below. You can use all effect modules together or selectively use certain modules by setting them to on or off. -
Page 12: Effect Types And Parameters
POSITION Selects the connection position of the WAH/EFX module. Available settings are "bF" (before DRIVE module) and "AF" (after EQ/EXTRA EQ module). ZOOM G2 ZOOM G2 COMP COMP (Compressor) module Attenuates high-level signal components and boosts low-level signal components, thereby keeping the overall signal level within a certain range. -
Page 13: Znr
* Manufacturer names and product names mentioned in this table are trademarks or registered trademarks of their respective owners. The names are used only to illustrate sonic characteristics and do not indicate any affiliation with ZOOM CORPORATION. This effect makes an electric guitar sound like an acoustic guitar. -
Page 14: Extra Eq/Cabi&Mic
(1 – 99). For 1 second and Adjusts the level of the effect above, the adjustment is made in sound mixed to the original 100-ms steps (1.0 – 2.0). sound. ZOOM G2 ZOOM G2 Effect Types and Parameters FLANGER RATE RESONANCE 0 –... -
Page 15: Delay
10 – 990 ms, the adjustment is made in 10-ms steps (1 – 99). For 1 second and above, the adjustment is made in 100-ms steps (1.0 – 3.0). ZOOM G2 ZOOM G2 Effect Types and Parameters DELAY DELAY module This is a delay module which allows long delay times and use of the hold function. -
Page 16: Control
While a rhythm pattern is playing, the reverb effect is not available. Stop the rhythm pattern first (→ p. 12). ● High level of noise Is ZOOM AC adapter being used? Be sure to use only adapter for 9 V DC, 300 mA with center minus plug (ZOOM AD-0006). ● Battery life is short Are manganese batteries being used? The use of alkaline batteries is recommended. - Page 17 G2 Preset Pattern PatternName TimSig PatternName 8beat_1 POP_3 8beat_2 DANCE_1 8beat_3 DANCE_2 8shufle DANCE_3 16beat_1 DANCE_4 16beat_2 3per4 16shufle 6per8 ROCK 5per4_1 HARD 5per4_2 METAL_1 LATIN METAL_2 BALLAD_1 THRASH BALLAD_2 PUNK BLUES_1 BLUES_2 FUNK_1 JAZZ_1 FUNK_2 JAZZ_2 HIPHOP METRO_3 R'nR...
- Page 18 C MAJOR HARMONY This patch provides a mild lead sound accompanied by the harmonies based on the C major scale and makes our G2 the world’s first effective device in the class that features the HPS (harmonized pitch shifter) function. You can select the key and the scale according to the phrase you play.
- Page 19 Such as product names and company names are all (registered) brand names or trade marks of each respective holders, and Zoom Corporation is not associated or affiliated with them. All product names, explanation and images are used for only purpose of identifying the specific products that were referenced during product development.