Effect Types And Parameters; How To Read The Parameter Table - Zoom A2 Operation Manual

Effect Types and Parameters

How to read the parameter table

Module selector
The Module selector symbol
shows the position of the
selector knob at which this
module/parameter is called up.
Expression pedal
A pedal icon (
(FP01/FP02).
Specify the respective module as modulation target for the expression pedal (→ p. 22), and then select the
respective effect type of the module. The parameter can then be controlled in real time with a connected
expression pedal.
Tap
TAP
A tap icon ( ) in the listing indicates a parameter that can be set by repeatedly hitting (tapping) the
foot switch (FS01). The tap function must have been assigned to the foot switch beforehand (→ p. 21), and
a module that includes this parameter must be on.
In edit mode, tapping the foot switch will cause the respective parameter to be set according to the tapping
interval (modulation cycle, delay time, etc.).
In play mode and manual mode, tapping the foot switch will cause the TIME parameter of the delay effect
type in the DELAY/REVERB module to be temporarily changed. (In play mode and manual mode, only the
delay effect in the DELAY/REVERB module can be controlled by tap input.)
Hold
HOLD
A hold icon (
with the foot switch (FS01).
Set the foot switch function to "dH" (delay hold) (→ p. 21) for the respective patch. When this patch is then
selected in play mode or manual mode, the hold function can be switched on and off by pressing the foot
switch.
26
Effect parameters 1 – 3
These are the parameters that can be adjusted with parameter knobs
1 - 3 when the effect type is selected. The setting range for each
parameter is shown.Three-digit setting values are shown with a dot
between the two numerals.
Example: 0 - 98, 1.0 = 0 - 98, 100
Effect module
MOD/EFX
MOD/EFX (Modulation/Effects) module
Comprises modulation and delay effects such as chorus, wah, delay, and echo.
CH
CH CHORUS
This effect mixes a variable pitch-shifted component to the original signal, resulting in full-bodied resonating sound.
DEPTH
0 – 98, 1.0
Adjusts the modulation depth.
This is a warm sounding long delay of up to 5000 ms duration.
HOLD
PD
Pd PINGPONG DELAY
HOLD This is a ping-pong type delay wher e the delay sound alter nates between left and right.
These three ef fect types have the same parameters.
1 – 99, 1.0 –
TIME
5.0
Adjusts the delay time. In the
TAP
range from 10 – 990 ms, the
adjustment is made in 10-ms
steps (1 – 99). For 1 second and
above, the adjustment is made in
100-ms steps (1.0 – 5.0)."
) in the listing indicates a parameter that can be controlled with the expression pedal
) in the listing indicates an effect type for which hold can be turned on and off
Effect type
RATE
1 – 50
Adjusts the level of the effect
sound mixed to the original Adjusts the modulation rate.
sound.
FEEDBACK
0 – 98, 1.0
Adjusts the feedback amount.
MIX
0 – 98, 1.0
MIX
0 – 98, 1.0
Adjusts the level of the effect
sound mixed to the original
sound.
ZOOM A2