Efx Module - Zoom G2.1Nu Operation Manual

EFX module
This module includes wah and filter effects, as well as special effects such as a ring
modulator and an octaver.
AutoWah
This effect varies wah in accordance with picking intensity.
Resonance
This effect varies the resonance filter frequency according to picking intensity.
The two effect types above have the same parameters.
PARM1
Sense
(sensitivity)
Adjusts the sensitivity of the effect.
When set to a negative value, the
filter movement is reversed.
Booster
The booster increases signal gain to make the sound more powerful.
PARM1
Range
Adjusts the frequency range that
is boosted.
Tremolo
This effect varies the volume at a regular rate.
PARM1
Depth
Adjust the depth of the
modulation.
ZOOM G2Nu/G2.1Nu
-10–−1, Reso
1–10 (resonance)
Adjusts the intensity of the
resonance sound.
1–5 Tone
Adjusts the tone.
0–100
Rate
Adjusts the rate of the modulation.
PARM2
0–10
PARM2
0–10
PARM2
0–50
Effect Types and Parameters
PARM3
Level
Adjusts the level of the signal after
it has passed through the module.
PARM3
Level
Adjusts the level of the signal after
it has passed through the module.
PARM3
Wave DWN 0–9,
Sets the modulation waveform to
"UP" (rising sawtooth), "DWN"
(falling sawtooth) or "TRI"
(triangular). Higher numerical
values cause stronger clipping,
which emphasizes the effect.
2–100
2–100
UP 0–9,
TRI 0–9
35