Advertisement
Effect Types and Parameters
Parameter
Effect type
Flanger
This is a jet sound like an ADA flanger.
Page01
Page02
Effect screen
Effect Types and Parameters
[DYN/FLTR]
Comp
This compressor in the style of the MXR Dyna Comp.
Page01
Page02
RackComp
This compressor allows more detailed adjustment than Comp.
Page01
Page02
SlowATTCK
This effect slows the attack of each note, resulting in a violin-like performance.
Page01
Page02
ZNR
ZOOM's unique noise reduction cuts noise during pauses in playing without affecting the tone.
Page01
Page02
Sound input into the LineSel effect is sent directly to the OUTPUT jacks when OFF and to the next
LineSel
effect in order when ON.
Page01
Page02
Parameter range
Knob1
Depth
0–100
Sets the depth of the modulation.
PreD
0–50
Sets pre-delay time of effect sound.
Parameter explanation
Knob1
Sense
0–10
Adjusts the compressor sensitivity.
ATTCK
Slow, Fast
Sets compressor attack speed to
Fast or Slow.
Knob1
THRSH
0–50
Sets the level that activates the
compressor.
ATTCK
1–10
Adjusts the compressor attack rate.
Knob1
Time
1–50
Adjusts the attack time.
Knob1
THRSH
1–25
Adjusts the effect sensitivity.
Knob1
EFX_L
0–150
Adjusts level sent to next effect.
Effect explanation
Knob2
Rate
0–50
Sets the speed of the modulation.
Mix
0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
Tempo synchronization possible icon
Knob2
Tone
0–10
Adjusts the tone.
Knob2
Ratio
1–10
Adjusts the compression ratio.
Knob2
Curve
0–10
Set the curve of volume change during
attack.
Knob2
DETCT
GtrIn, EfxIn
Sets control signal detection level.
Knob2
OUT_L
0–150
2
Knob3
Reso
-10–10
Adjusts the intensity of the modulation resonance.
Level
0–150
Adjusts the output level.
Knob3
Level
0–150
Adjusts the output level.
Knob3
Level
0–150
Adjusts the output level.
Knob3
Level
0–150
Adjusts the output level.
Knob3
Level
0–150
Adjusts the output level.
Knob3
Advertisement
