Activate Looper; Set Recording Time; Adjust Tempo; Using The Looper - Zoom G2.1Nu Operation Manual

1. Activate the looper
In play mode, press both [▼]/[▲] foot switches until "LOOPER"
appears on the screen.
NOTE
When the looper is activated, the DELAY module is turned OFF.
2. Set the recording time
Turn Parameter knob 1 to select the recording time.
■ Note mark
Set the recording time by setting the tempo and the number of quarter notes. For
example, the recording time is two beats at the current tempo when set to " ♩ ×2."
■ Manual
Use the foot switch to start and stop recording.
3. Adjust the tempo
Turn Parameter knob 2 to set the tempo.
Tempo can be set in a range from 40–250 BPM (beats per minute). If you selected a note
mark in step 2, recording time is calculated according to the tempo.
You can also adjust the tempo using the TAP key (→P17).
HINT
ZOOM G2Nu/G2.1Nu
Using the Looper
Recording time
Tempo Volume of
recorded phrase
Record time
Tempo
13