Maintenance - Salus ST320RF Instruction Manual

S-series digital thermostat
Table of Contents

Advertisement

ST320RF Manual
Version 005:Layout 1
ENERGY TIP
One way to set and use your room thermostat is to find the lowest temperature setting that you are
comfortable with, and then leave it set at this temperature. You can do this by setting the room
thermostat to a low temperature, (for example 17 °C) and then increasing the setting by one degree each
day until you are comfortable with the room temperature - you won't have to adjust the thermostat
further, as adjustment above this setting will waste energy - a 1 °C increase in temperature is equal to
3% of your heating costs.

MAINTENANCE

The ST320RF thermostat requires no special maintenance. Periodically, the outer casing can be wiped
clean using a dry cloth (please DO NOT use solvents, polishes, detergents or abrasive cleaners, as these
can damage the thermostat).
There are no user serviceable parts within the unit; any servicing or repairs should only be carried out
by Salus Controls or their appointed agents.
Should the ST320RF thermostat fail to function correctly, check:
Thermostat batteries are the correct type, fitted correctly and are not exhausted
- fit new batteries if in doubt.
The ST320RF Receiver has mains power (Green LED on)
The ST320RF Receiver is switched on.
If fitted, the heating system time switch or programmer is switched on.
If the ST320RF is still not functioning correctly, press the Reset Button.
ST320RF INSTRUCTION MANUAL
21/10/10
15:32
Page 27
27

Advertisement

Table of Contents
loading

Table of Contents