Before Starting Playback
Turning the Power On
POWER
STANDBY indicator
AQUOS PURE MODE indicator
Turning the power on
Press POWER on the remote control or on the main
unit to turn on the power of the system.
NOTE
•
When you turn on this system for the first time after
purchase or when you turn on this system after you
perform "To Reset this System" (see page 83), the
language setting screen will be displayed, so please
perform the language setting (see step 4 of page 37).
36
BD/DVD/CD mode indicator
Entering standby
Press POWER on the remote control or on the main
unit to enter standby.
•
If you press POWER again immediately after entering
standby, the system may not turn on. If this happens, wait
for 10 seconds or more and then turn on the power again.
NOTE
•
When the STANDBY indicator is blinking (may take some
time), the system cannot be turned on.
Indicators on the Main Unit
STANDBY indicator
Red blinks
Red on
AQUOS PURE MODE indicator
Green on
BD/DVD/CD mode indicator
Blue on
Blue blinks
Preparing for standby
Standby
Output in AQUOS PURE
MODE (See page 43.)
Playing back
Loading a disc