Basic Operations; Loading A Disc; Input Selection; Changing The Input Selection On The Main Unit - Sharp AQUOS BD-MPC41U Operation Manual

Basic Operations

VOLUME
POWER control
SELECTOR

Loading a Disc

1
Press POWER to turn on the power.
2
Press OPEN/CLOSE to open the disc tray.
3
Load a disc on the disc tray.
• Insert the disc with the label face up.
• In case of disc recorded on both sides, face down the
side to play back.
4
Press OPEN/CLOSE to close the disc tray.
• Playback may begin automatically, depending on the
disc.

Input Selection

Changing the input selection on
the main unit
You can change the input source using SELECTOR.
Each time SELECTOR is pressed, the input source
changes as follows:
DISC
DIGITAL 1
DIGITAL 2
ANALOG
TUNER
iPod

Changing the input selection with

OPEN/CLOSE

the remote control

The operation buttons vary depending on the input
mode.
Pressing BD/AUX changes the input mode as follows.
To change the FM input mode, press FM.
To select the iPod mode, press iPod/ .

Volume Adjustment

Adjusting the volume

Main unit operation:
When the VOLUME control is turned clockwise, the
volume will increase.
When it is turned counterclockwise, the volume will
decrease.
Remote control operation:
Press VOL+ to increase the volume and VOL- to
decrease the volume.
• If
AQUOS AUDIO SP" in AQUOS LINK menu of AQUOS.
(Page 44)

Muting the sound

The sound is muted temporarily when pressing MUTE
on the remote control.
*1
(status display) appears.
*2 The elapsed time is displayed during disc playback.
• The mute function is canceled when you adjust the volume.
DISC DIGITAL 1 DIGITAL 2
FM (STEREO)
flashes by adjusting the volume, please set to "By
flashes for 3 seconds, and then the "Function"
ANALOG
FM (MONO)
*1
*2
41